Whirlpool ACQ102 repair
Window room air conditioner, ACQ family. Service for this model across Tampa Bay.

- Model
- ACQ102
- Type
- Window room air conditioner
- Series
- ACQ family
- Years
- Legacy model
- Brand
- Whirlpool
About the ACQ102
Several cooling and fan speeds, adjustable louvers and a washable filter come with the ACQ102, a Whirlpool room air conditioner. It is an older window model, still found in bedrooms and small shops where it runs most of the summer.
Reduced cooling on a unit like this points first to a dirty condenser, so that coil is cleaned and inspected before anything deeper. Then we check where the thermostat probe sits, because one that has slipped away from the evaporator fins can run the compressor too long or too briefly. A rattle leads to the blower wheel, and a warm plug leads to the cord and outlet.
What we check on a ACQ102 visit
- Condenser coil cleanliness and airflow
- Thermostat sensing probe position
- Blower wheel wobble, power cord and plug for heat marks
Key features
- Whirlpool room air conditioner
- Multiple cooling and fan speeds
- Adjustable louvers
- Washable filter
The model number is on the data label: inside the door frame, on the drawer edge or behind the kick plate. We are an independent repair company, not affiliated with Whirlpool Corporation.
Other Whirlpool room air conditioner models
ACE familyACE124XSWindow room air conditioner
ACE familyACE184XSWindow room air conditioner
ACE familyACE244XSLarge slide-out window air conditioner
ACQ familyACQ082Window room air conditioner
ACQ familyACQ122High-capacity window air conditioner
ACQ familyACQ152XKMechanical-control window air conditioner
ACQ familyACQ189XRLarge-capacity window air conditioner
Room Air ConditionerWHAW061BW Window Air ConditionerWindow air conditioner with remoteACQ102 questions
Why does my ACQ102 rattle?
A loose blower wheel or a fan blade touching the shroud. The wheel is secured or replaced and the motor shaft checked for wear.
The plug on my window AC feels hot. Is that serious?
Yes, treat it as a safety concern. Unplug the unit and call. The cord, plug and outlet are inspected for heat damage, and the motor tested for excess current draw.