Whirlpool GC2000XE repair
1/2 HP under-sink garbage disposer. Service for this model across Tampa Bay.

- Model
- GC2000XE
- Type
- 1/2 HP under-sink garbage disposer
- Brand
- Whirlpool
About the GC2000XE
A 1/2 HP continuous-feed unit running at 1,725 RPM on a 120 V, 60 Hz supply, the GC2000XE is a Whirlpool under-sink disposer. It has a galvanized steel grinding wheel and shredder ring and an overload protector with a manual reset.
That reset is the first thing examined when a disposer goes dead. A tripped protector often means the wheel jammed, so the jam is cleared, the motor given time to cool, the reset pressed and the unit run. If it trips again right away, the motor and supply are tested. The flange and drain connection get a leak check too, since drips are a common find under a Tampa Bay kitchen sink.
What we check on a GC2000XE visit
- Overload protector and manual reset after a trip
- Grinding wheel for a jam from a hard object
- Mounting flange and drain connection leaks, power through the switch and outlet
Key features
- 1/2 HP continuous-feed, 1,725 RPM
- Galvanized steel grinding wheel and shredder ring
- Overload protector with manual reset
- 120 V 60 Hz supply
The model number is on the data label: inside the door frame, on the drawer edge or behind the kick plate. We are an independent repair company, not affiliated with Whirlpool Corporation.
Other Whirlpool disposer models
GC2000XE questions
My disposal stopped and will not start. What can I try?
Switch it off at the wall, then press the manual reset on the unit. If it starts, a jam probably tripped the protector. If it trips again, the motor and supply need testing.
What happens if a hard object gets into the grinder?
The wheel can jam and trip the overload protector. Power is shut off, the wheel freed, the shredder ring inspected and the housing checked for leaks before the unit is put back.