Whirlpool YWGE745C0FS repair
Electric double wall oven. Service for this model across Tampa Bay.

- Model
- YWGE745C0FS
- Type
- Electric double wall oven
- Brand
- Whirlpool
About the YWGE745C0FS
Two cavities share one cabinet and one set of controls on the Whirlpool YWGE745C0FS, an electric double oven also listed as YWGE745C0FS5. Trouble in one oven does not automatically mean the other is affected.
Sorting that out comes first on every visit. We ask which cavity is acting up and test it alone, starting with the bake element, then the broil element and the sensor. If both ovens go quiet together, the shared supply and the control come before anything inside either cavity. A double oven is heavy and set in a tall cabinet, so we confirm the diagnosis in place whenever we can. Parts are ordered from the label, and you approve the price in writing.
What we check on a YWGE745C0FS visit
- Upper and lower cavity heating tested separately
- Element and sensor in each cavity, plus door latch and hinge on both doors
- Shared control, clock and the junction wiring feeding both ovens
Key features
- Electric double oven
- Two oven cavities in one unit
- Also sold as YWGE745C0FS5
The model number is on the data label: inside the door frame, on the drawer edge or behind the kick plate. We are an independent repair company, not affiliated with Whirlpool Corporation.
Whirlpool wall oven codes
Codes listed for Whirlpool wall ovens. Which ones a unit can show depends on its control board, so we confirm by the full model number.
Other Whirlpool wall oven models
Wall OvenRBD275PDB27-inch electric built-in oven
Wall OvenRBD305PDBElectric built-in wall oven
Wall OvenRBS245PRSBuilt-in single electric wall oven
Wall OvenRBS275PDBElectric built-in oven
Wall OvenSB160PEDB24-inch gas built-in oven
Wall OvenSB160PEEB24-inch gas wall oven
Wall OvenSB160PEXBGas built-in wall oven
Wall OvenWGE745C0FEElectric double wall ovenYWGE745C0FS questions
Only my lower oven quit heating. Do the two ovens share parts?
Each cavity has its own elements and sensor, so we test the lower oven by itself. If the upper oven works normally, the problem sits inside the lower cavity, not in the shared controls.
Both ovens are dead. Where do you look?
At the shared supply: breaker, junction and control power, before opening either cavity. A single loose connection can silence both ovens at once.