(813) 565-3059 Book a Repair
Whirlpool cooktop error code

Whirlpool Cooktop Message “d E”: Demo Mode and How to End It

When “d E” appears and every burner is off, demo mode is active on a Whirlpool cooktop. It is a setting and not a failed part, and the Booster key switches it off after power returns.

Normal status, not a failureChecked November 2026

What does Whirlpool cooktop code “d E” mean?

Whirlpool electric radiant (smoothtop) cooktops and induction models such as the WCI55US0JS show “d E” when demo mode is switched on and every burner is off. In that mode the display and keypad answer, but the cooktop does not heat and no cooking function starts. A setting is responsible and not a damaged part, and the owner can turn it off.

“d E” at a glance

Code
“d E”
Appliance
Whirlpool cooktop
Applies to
Whirlpool smoothtop and induction cooktops (WCI55US0JS)
Type
Normal status, not a failure
Can you clear it yourself?
Yes, it is a normal message or setting
Most likely cause
Demo mode switched on, perhaps after power was cut and returned

What you may notice with “d E”

  • “d E” shows on the display with every burner off.
  • The keypad responds, but no burner heats.
  • The message appeared after power was cut and restored.
  • The cooktop came from a showroom or was just installed.

How the cooktop detects “d E”

Demo mode is a setting for showrooms. It keeps the display and the keypad alive so that a customer can touch the controls and watch the response, while the control never sends power to the burners. That is why “d E” appears with every burner off.

The mode switches off with a deliberate action rather than a menu. After power returns to the cooktop, a window of about one minute opens, and holding the bottom left Booster key for 5 seconds during that window tells the control to leave demo mode. Outside that window, the key press is simply ignored, so cutting the power again and repeating the steps restarts the window.

Why “d E” appears

  • Demo mode switched on, perhaps after power was cut and returned
  • A keypad key held during power-up
  • Control that stays in demo mode even after the owner's steps

Can you keep using the cooktop with “d E”?

There is nothing unsafe about demo mode, because no power reaches the burners while it is on. You simply cannot cook. Switch it off with the Booster key press after power returns. If the message stays or the cooktop still will not heat after you have repeated the steps, something else is going on and it should be tested.

What you can safely check

  1. Check that every burner is off and “d E” is showing.
  2. Cut the cooktop's power at the breaker and restore it.
  3. Once power is back, you have the first minute: press and keep down the Booster (quick heating) key in the bottom left corner for 5 seconds.
  4. Check whether the display clears and the burners come alive.
  5. The induction model uses the same Booster press to end demo mode. We can help if it does not work.

What our technician does for “d E”

  • See whether the keypad registers touches at all when the Booster press does nothing
  • Check that the cooktop heats normally after demo mode is cleared
  • Give a written price before any work starts

How to keep “d E” from coming back

  • Avoid holding keys on the keypad while power is being restored.
  • After installation or a move, check the display for “d E” before assuming the cooktop is broken.
  • Keep the user guide handy so you can follow the exact Booster key steps for your model.

Technical reference

Code
“d E”
Appliance
Whirlpool cooktop
Control family
Whirlpool smoothtop and induction cooktops (WCI55US0JS)
Checked
November 2026

Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.

FAQ

“d E” questions

Why does my cooktop not heat while “d E” is shown?

In demo mode only the display and keys work, as a showroom effect. The burners receive no power, and nothing heats before the mode is turned off.

What is the way to leave demo mode?

Restore power, then hold the Booster key in the keypad's bottom left corner for 5 seconds, all within the first minute. Smoothtop and induction models use the same steps.

I missed the first minute. What should I do?

Cut the breaker again and start over, since the key press has an effect only just after power returns. If a few attempts fail, tell us and we will test the keypad.

Is demo mode something I did wrong?

Not necessarily. The cooktop may have come from a showroom with the mode on, or a key may have been held while power returned. Neither harms it, and the same press clears the mode.

Does demo mode need a repair?

No. It is a setting, and the owner can switch it off. A repair only comes into question if the Booster press fails after several tries, which then points to the keypad or the control.

Something else going on with your cooktop?

We trace the cause in your home first and write the price down before any part is swapped.

Call Book a Repair
Call (813) 565-3059 Book a Repair