Whirlpool Older Smoothtop Cooktop F22: Lost Link to Touch Module
F22 on an older Whirlpool smoothtop cooktop in the WCE97US0KS family is a communication error between the touch control module and the rest of the cooktop. Reset power once, then avoid the keys.
What does Whirlpool cooktop code F22 mean?
Older radiant (smoothtop) Whirlpool cooktops such as model WCE97US0KS show F22 when the touch control module reports another internal communication error. Contact has dropped between the keypad module and the remainder of the unit. We repair cooktops of this age, and when the cost makes no sense for how old the unit is, we say so openly.
F22 at a glance
- Code
- F22
- Appliance
- Whirlpool cooktop
- Applies to
- Older Whirlpool radiant smoothtops, e.g. model WCE97US0KS
- Type
- Needs attention soon
- Can you clear it yourself?
- Sometimes, after the safe checks below
- Most likely cause
- A touch control module that has lost contact with the main control
What you may notice with F22
- F22 appears and the touch keys stop answering.
- The cooktop ignores your presses or reacts oddly.
- A reset may bring the keys back for a short time.
- The code returns when the link drops again.
How the cooktop detects F22
The touch keys on a smoothtop are part of a module that sends every press to the main control of the cooktop. The main control answers by powering the right burner at the right level. That conversation depends on a clean connection between the module and the rest of the unit.
F22 is shown when the connection is lost. The control no longer hears the keypad, or the keypad can no longer hear the control, so the cooktop cannot take your commands with any confidence and displays the code. The break may come from a worn or loose link behind the keypad, from the module itself, or from a glitch after a power disturbance. A reset restarts both ends and can restore contact for a time, but a link that has started to fail tends to fail again.
Likely causes of F22
- A touch control module that has lost contact with the main control
- A link behind the keypad that is worn or loose
- A glitch following a power disturbance
Can you keep using the cooktop with F22?
Avoid using the touch keys while F22 is showing, and do not cook with a cooktop whose keypad is not answering reliably. If you cannot switch a burner off when you want to, that is a safety problem. After a reset, if the code is gone and the keys respond properly, careful use is reasonable. If F22 returns, switch the breaker off.
What you can safely check
- Switch every surface control off, then turn the breaker off.
- Wait a minute and switch it on again.
- Stay close for a minute in case F22 returns.
- Do not rely on the keys until a technician has looked.
- If the code comes back, keep the cooktop off and call us.
What our technician does for F22
- When F22 returns, test the touch module and then its link
- See whether parts for this older cooktop can be had before quoting
- Put the price in writing before work starts
How to keep F22 from coming back
- Keep the touch panel dry and wipe it only with the cooktop switched off.
- Report a flicker or a surge when you notice one, since a power disturbance can upset the link.
- Mention any keys that react slowly before F22 appears so the link can be checked early.
Technical reference
- Code
- F22
- Appliance
- Whirlpool cooktop
- Control family
- Older Whirlpool radiant smoothtops, e.g. model WCE97US0KS
- Maker documentation
- Whirlpool owner manuals and support
- Checked
- November 2026
Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.
Related Whirlpool cooktop error codes
F22 questions
What is it that F22 calls the touch control module?
Think of the keys under your fingertips as a module of their own. Your commands travel through it to the cooktop's control, and F22 reports that this path has broken down.
Does F22 get worse if I wait?
A link that is weakening can cut out more often as time passes. A second F22 is reason enough to arrange a visit before the keys stop responding altogether.
Can the touch control be repaired on its own?
When it proves to be the cause, yes. That is confirmed first and priced in writing, so you decide before any part is ordered.
Is F22 the same as other touch communication codes?
They are alike in that each describes a communication problem on the touch control side, but each code has its own wording. Testing shows whether the module or the link is the cause on your cooktop.
Does an older cooktop with F22 have to be replaced?
No, not as a first conclusion. Parts availability is checked first, the cost is quoted in writing, and we say openly if the repair makes no sense for the age of the cooktop.
Need help with F22?
We trace the cause in your home first and write the price down before any part is swapped.