Whirlpool Older Smoothtop Cooktop F13: Touch Control Link
F13 on an older Whirlpool smoothtop cooktop in the WCE97US0KS family is a communication problem inside the touch control module. Reset power once, then arrange service if it returns.
What does Whirlpool cooktop code F13 mean?
Inside older radiant (smoothtop) Whirlpool cooktops, model WCE97US0KS for example, F13 reports a communication error inside the touch control module. Information is not passing properly between the keypad half and the control half. We repair units of this age, and we say directly when the repair cost does not make sense for how old the unit is.
F13 at a glance
- Code
- F13
- Appliance
- Whirlpool cooktop
- Applies to
- Older Whirlpool radiant smoothtops, e.g. model WCE97US0KS
- Type
- Needs attention soon
- Can you clear it yourself?
- Sometimes, after the safe checks below
- Most likely cause
- A touch control module that has dropped out of contact
What you may notice with F13
- F13 appears and the touch panel stops answering normally.
- Pressing keys does nothing or behaves unpredictably.
- A reset may bring the panel back for a short time.
- The code returns when the link drops again.
How the cooktop detects F13
Your fingertip on the glass is only the start of the signal. The touch control module reads it and passes the request along to the control that powers the burners. When that handoff works, a press on the panel changes the heat under the pan. F13 is raised when the handoff fails: the module reports that it cannot communicate properly with the other side.
Because the code concerns the link and not a burner, the heating elements themselves may be perfectly healthy. A joint between the keypad and the control that has loosened or aged could interrupt the exchange, as could a failing module or a glitch after a power disturbance. Cycling power at the breaker restarts both ends and sometimes restores the link. When F13 returns, the break is lasting and the module and connection must be checked.
Likely causes of F13
- A touch control module that has dropped out of contact
- A worn joint between the keypad and the control
- A one-off glitch after a power disturbance
Can you keep using the cooktop with F13?
Please do not cook while F13 is showing. If the keypad cannot communicate with the burner control, a burner might not switch off when you press the key to turn it off, which is dangerous on a hot cooktop. If a reset clears the code and the keys respond properly, careful use is reasonable. If F13 returns, keep the cooktop off.
What you can safely check
- Turn off all surface controls and switch the breaker off.
- Leave the breaker off for sixty seconds.
- Restore power and wait.
- Watch for F13 through the next minute.
- A second F13 means the controls cannot be trusted; keep the cooktop off, note the code and call us.
What our technician does for F13
- Tell a touch control problem apart from a connection problem by testing both
- Check whether parts for this older cooktop are available before quoting
- State the price in writing before any work
How to keep F13 from coming back
- Keep liquids away from the touch panel and wipe it only when the cooktop is switched off.
- Pass on any flicker or surge you notice, since a power disturbance can upset the link.
- Mention any odd keypad behavior before F13 appears, so the connection can be checked early.
Technical reference
- Code
- F13
- Appliance
- Whirlpool cooktop
- Control family
- Older Whirlpool radiant smoothtops, e.g. model WCE97US0KS
- Maker documentation
- Whirlpool owner manuals and support
- Checked
- November 2026
Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.
Related Whirlpool cooktop error codes
F13 questions
How does F13 compare with F22?
The two codes sound alike, since each concerns communication on the touch control of an older smoothtop. Testing on your cooktop shows whether the module or its link is the culprit.
Will a breaker reset make F13 go away for good?
It may, if a glitch caused it. If a worn control or connection is behind it, F13 returns and repair becomes necessary. You hear the explanation before spending anything.
Is it dangerous to use the cooktop with F13 showing?
Keys that cannot reach the control may not be answered reliably. For that reason we recommend not cooking on the cooktop until it has been properly checked.
Does F13 mean the whole cooktop is finished?
Not necessarily. The communication problem may be a connection and not the module, and both get tested before quoting. You then receive the price in writing and an honest view on whether repair is sensible for the cooktop's age.
Can pressing the keys clear F13?
No. The code reports that the keypad and control are not communicating, so pressing keys will not clear it. The breaker reset is the one owner step; beyond that, the link needs testing.
Need help with F13?
We trace the cause in your home first and write the price down before any part is swapped.