(813) 565-3059 Book a Repair
Whirlpool cooktop error code

Whirlpool Older Smoothtop Cooktop F03: Touch Control Link Lost

F03 on an older Whirlpool smoothtop cooktop, model WCE55US6HS among them, reports a communication problem inside the touch control module. Reset power once; a repeat needs repair.

Needs attention soonChecked November 2026

What does Whirlpool cooktop code F03 mean?

Inside an older radiant (smoothtop) Whirlpool cooktop, such as model WCE55US6HS, F03 reports that the touch control module has hit a communication error. The part that reads your keypad and the part that runs the burners have stopped swapping information cleanly. We repair cooktops of this age, and we say plainly when the repair cost does not make sense for how old the unit is.

F03 at a glance

Code
F03
Appliance
Whirlpool cooktop
Applies to
Older Whirlpool radiant smoothtop cooktops, e.g. model WCE55US6HS
Type
Needs attention soon
Can you clear it yourself?
Sometimes, after the safe checks below
Most likely cause
The touch control module dropping out of contact with the rest of the cooktop

What you may notice with F03

  • F03 shows on the display and the touch panel stops answering.
  • Burners may not respond when you press the keys.
  • A reset may bring the panel back for a while.
  • The code returns when the link fails again.

How the cooktop detects F03

Two groups of electronics share the work in a smoothtop cooktop. One group reads the touch keypad on the glass. The other drives the burners and decides how much power each one receives. They talk to each other constantly, so that a touch on the panel turns into a change at the burner.

F03 is displayed when that conversation breaks down. If the keypad side cannot be heard by the burner side, or the reverse, the control cannot trust what it is being told, and it stops. The cause may be the module itself, a connection that has loosened or aged, or a brief disturbance after a power event. A breaker reset restarts both sides at once and can restore the link. If it fails again, the break is lasting.

Likely causes of F03

  • The touch control module dropping out of contact with the rest of the cooktop
  • A loose or aged connection between keypad and control
  • An electronic hiccup following a power disturbance

Can you keep using the cooktop with F03?

Do not cook while F03 is on the display. A touch panel that cannot talk to the burner control may not turn a burner off when you ask it to, which is a safety concern on a hot cooktop. If a breaker reset clears the code and the controls respond properly, careful use is reasonable. If F03 comes back, keep the cooktop off.

What you can safely check

  1. Turn every surface control off, then switch the cooktop's breaker off.
  2. Leave it off for sixty seconds.
  3. Switch the breaker back on.
  4. Give it a minute and see whether F03 returns; if the display stays clear, try each burner briefly.
  5. If F03 comes back, leave the cooktop off and call us.

What our technician does for F03

  • Test the touch control and its connection to learn which side of the link has failed
  • Check parts availability for this older cooktop before quoting
  • Give a written price so there are no surprises

How to keep F03 from coming back

  • Switch the cooktop off at the controls before you wipe the panel, so moisture does not reach the keys.
  • Mention any flicker or surge you notice, since a power disturbance can upset the link.
  • In Florida storm season, a surge protector on the circuit is worth discussing with an electrician.

Technical reference

Code
F03
Appliance
Whirlpool cooktop
Control family
Older Whirlpool radiant smoothtop cooktops, e.g. model WCE55US6HS
Checked
November 2026

Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.

FAQ

F03 questions

Does an older cooktop with F03 deserve a repair?

Frequently, when the touch control is the only problem. You get the cost in writing, and you hear directly if a repair would not make sense.

Can a breaker reset settle F03 for good?

It can clear a short communication hiccup. If F03 comes back, the touch control or its connection has a lasting problem that calls for repair.

Is it all right to cook while F03 is displayed?

Better not. If the touch panel cannot communicate, it may fail to switch a burner off when you ask, so leave the cooktop off until it has been examined.

Does F03 always mean a new control is needed?

No. Sometimes the connection is the problem and the module is fine. We test both before quoting, then give the price in writing and say whether the repair makes sense for the cooktop's age.

How is F03 likely to change if I ignore it?

A lasting communication problem tends to return more often once the link has started failing. Since the panel may also stop responding to your keys, waiting is not a safe plan on a hot cooktop.

Need help with F03?

We trace the cause in your home first and write the price down before any part is swapped.

Call Book a Repair
Call (813) 565-3059 Book a Repair