Whirlpool Older Smoothtop Cooktop F58: Power Board Circuit
F58 is a control code for older Whirlpool smoothtop cooktops that points to the power board and the wiring around it. Open the breaker for a minute and see whether the display stays clear.
What does Whirlpool cooktop code F58 mean?
Pointing at the board that powers the cooking areas and the wiring around it, F58 shows on older Whirlpool radiant smoothtop cooktops. Cycling the breaker is the only step the guidance gives. The elements may not heat as expected while the code is on the display. We repair these older cooktops and speak plainly if a repair is not worth it.
F58 at a glance
- Code
- F58
- Appliance
- Whirlpool cooktop
- Applies to
- Older Whirlpool radiant smoothtop cooktops
- Type
- Needs attention soon
- Can you clear it yourself?
- Sometimes, after the safe checks below
- Most likely cause
- A power board with a problem of its own
What you may notice with F58
- F58 appears on the display of the cooktop.
- The cooking elements may fail to heat as expected.
- A breaker reset may clear it once.
- A repeat points to the board or its wiring.
How the cooktop detects F58
Behind the glass, an older radiant smoothtop has a board that decides how much current each element receives, and wiring that links the board to the elements and to the keypad. F58 is the control's way of saying that something on this power side is not right. It points at the board and the wiring, yet it does not tell which one has the problem.
The breaker reset serves two purposes. It restarts the board, which clears a brief electrical disturbance, and it shows whether the condition is still present. A screen that stays clear after a minute means the reset held. If F58 returns, a technician has to examine the harness and test the board, because a loose connection and a failing board look the same from the outside.
Likely causes of F58
- A power board with a problem of its own
- Wiring around that board that has aged or loosened
- A brief disturbance on the electrical supply
Can you keep using the cooktop with F58?
If F58 does not return after the reset and the elements heat as they should, you can use the cooktop, with a glance at the display now and then. If the code comes back, stop using it until the circuit has been tested. A board or wiring problem can make heating unpredictable, and nobody should cook on that. Switch the breaker off while you wait.
What you can safely check
- Switch every control off.
- Flip the breaker that feeds the cooktop to open and leave it a minute.
- Close the breaker again.
- A screen that stays clear for a minute means the reset held.
- When F58 comes back, leave the cooktop off and call us.
What our technician does for F58
- Inspect the harness, then test the board, before quoting any part
- Write the price down before the work begins
- Say plainly when an older cooktop is not worth repairing
How to keep F58 from coming back
- Keep moisture away from the edges of the cooktop where wiring sits close to the glass.
- Report a flicker or a surge if one occurred just before F58 appeared.
- Reset once and observe; repeated resets only postpone finding the cause.
Technical reference
- Code
- F58
- Appliance
- Whirlpool cooktop
- Control family
- Older Whirlpool radiant smoothtop cooktops
- Maker documentation
- Whirlpool owner manuals and support
- Checked
- November 2026
Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.
Related Whirlpool cooktop error codes
F58 questions
What does code F58 stand for?
It is a code from the power side of the control on an older Whirlpool smoothtop. Whirlpool names the board and the wiring and asks for a minute at the breaker.
Can the cooktop be used once F58 has gone?
Yes, if it stays gone and every element heats normally. Should F58 return, hold off until the circuit has been tested.
Why would an older cooktop show F58?
Heat and long use wear down boards and connections. Repair is offered where it makes sense, and you hear the price first.
Do boards and wiring really age on older cooktops?
Yes. Heat and years of use affect electronic boards and their connections. That is why the first checks look at the harness and the board before any part is quoted, and why age is part of the repair discussion.
Does F58 mean the whole cooktop has to be replaced?
No, not as a first conclusion. The board and wiring are tested first, and a written price follows. If replacing the cooktop would be wiser for its age, you hear that plainly.
Need help with F58?
We trace the cause in your home first and write the price down before any part is swapped.