Whirlpool Cooktop FC E0: Supply, Wiring or Induction Module
FC E0 on a Whirlpool smoothtop cooktop names three areas to check: the electrical supply, the wiring, and the induction module. A one-minute breaker reset is the only step in the guidance.
What does Whirlpool cooktop code FC E0 mean?
Whirlpool lists three areas for FC E0 on a radiant smoothtop cooktop: the electrical supply, the wiring that goes with it, and an induction module. Guidance mentions nothing beyond a power reset. The cooking areas may not heat while FC E0 is displayed, and each of the three areas gets checked before a repair is quoted.
FC E0 at a glance
- Code
- FC E0
- Appliance
- Whirlpool cooktop
- Applies to
- Whirlpool radiant smoothtop cooktops
- Type
- Needs attention soon
- Can you clear it yourself?
- Sometimes, after the safe checks below
- Most likely cause
- An electrical supply reaching the cooktop in poor condition
What you may notice with FC E0
- FC E0 appears on the display of the cooktop.
- The cooking areas may not heat.
- A breaker reset may clear the code once.
- A repeat means one of the three listed areas needs testing.
How the cooktop detects FC E0
The control reports FC E0 when it finds a problem that the guidance traces to one of three areas. The first is the electrical supply reaching the cooktop. The second is the wiring in the control circuit, which carries power and signals between parts. The third is the induction module, which the guidance lists for this code even though the cooktop is a smoothtop.
Because three areas are named and only a power reset is given, the code cannot show which one is responsible. A reset restarts the electronics and clears a temporary electrical disturbance. If FC E0 stays away, the disturbance passed. If it returns, the supply is measured first, since a weak feed can look like a failing part, then the wiring is inspected and the module is tested.
Likely causes of FC E0
- An electrical supply reaching the cooktop in poor condition
- Wiring in the control circuit that has loosened or worn
- An induction module that has developed a problem
- A temporary electrical disturbance
Can you keep using the cooktop with FC E0?
If FC E0 does not return after the reset and the cooking areas heat normally, careful use is possible. If the code comes back, leave the cooktop off. Because the supply and wiring are involved, never open panels or probe connections yourself. Switch the breaker off and have the three listed areas tested before cooking on it.
What you can safely check
- Switch all cooking areas off, then walk to the breaker.
- Open the cooktop's circuit breaker and leave it for a minute.
- Close it again.
- Wait a minute and watch for FC E0.
- Should it return, keep the cooktop off and call us.
What our technician does for FC E0
- Measure the supply before anything else, then look over the wiring and test the module
- Settle the price in writing before work starts
- Examine all three listed areas before quoting a repair
How to keep FC E0 from coming back
- Notice whether lights dim or other appliances misbehave when the cooktop runs.
- Never open panels or probe connections on your own.
- In Florida storm season, mention any outage or surge that came before the code.
Technical reference
- Code
- FC E0
- Appliance
- Whirlpool cooktop
- Control family
- Whirlpool radiant smoothtop cooktops
- Maker documentation
- Whirlpool owner manuals and support
- Checked
- November 2026
Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.
Related Whirlpool cooktop error codes
FC E0 questions
What is FC E0 telling me about my cooktop?
Three possibilities are named, the electrical supply, the wiring and the induction module, and a breaker reset lasting a minute comes first. Nothing singles out a single one.
Does FC E0 pose an electrical danger?
The code is only a control message, yet supply and wiring are involved, so never open panels or probe connections. Leave the testing to a technician.
Why does a smoothtop code mention an induction module?
Because the published guidance for this code lists one. The code is followed, and the cooktop is tested for what it really contains.
Can a storm cause FC E0?
A surge or outage can disturb the supply and trip the code, and a reset may clear it. If FC E0 returns afterward, the disturbance was not the whole story, and the wiring and the module need testing.
What should I say when I phone about FC E0?
Give the code, say whether the cooking areas heat, and mention whether other appliances on the circuit act strangely. That helps decide whether to start with the supply or with the cooktop.
Need help with FC E0?
We trace the cause in your home first and write the price down before any part is swapped.