(813) 565-3059 Book a Repair
Whirlpool cooktop error code

Whirlpool Older Smoothtop Cooktop F40: Touchpad or Power Board

F40 on an older Whirlpool smoothtop cooktop points to the control side: the touchpad, the cooktop power control board, or the wiring between them. A power reset is the only step given.

Needs attention soonChecked November 2026

What does Whirlpool cooktop code F40 mean?

F40 points to the control side of an older Whirlpool radiant smoothtop cooktop. Guidance offers a power reset and nothing more, though it names three areas: the touchpad, known as the user interface, the board that controls power to the cooking areas, and the wiring joining them. With F40 on the display, the cooking areas may not respond. We repair these older cooktops.

F40 at a glance

Code
F40
Appliance
Whirlpool cooktop
Applies to
Older Whirlpool radiant smoothtop cooktops
Type
Needs attention soon
Can you clear it yourself?
Sometimes, after the safe checks below
Most likely cause
A touchpad (the user interface) that has stopped communicating

What you may notice with F40

  • F40 appears and the cooking areas may not respond.
  • The touch keys may seem dead.
  • A reset may clear the code for a while.
  • A repeat within a minute shows the cause is still there.

How the cooktop detects F40

Two circuit assemblies share the control of this cooktop. The touchpad, which the guidance calls the user interface, takes your key presses. The cooktop power control board takes the resulting commands and switches power to the cooking areas. Wiring connects the two. F40 tells you the control has found a problem somewhere on that side of the unit.

Because the guidance names all three areas and gives only a power reset, the code cannot point at a single part. The touchpad may not be communicating, the board may have a problem, or the wiring between them may. Cycling the breaker restarts the electronics, which clears a short-lived upset. If F40 returns after a minute of watching, the cause is still present, and the touchpad, the board and the connections have to be tested.

Likely causes of F40

  • A touchpad (the user interface) that has stopped communicating
  • The board that controls power to the cooking areas
  • The wiring running between touchpad and board
  • A momentary electrical upset that cycling power removes

Can you keep using the cooktop with F40?

If F40 is gone after the reset and every cooking area heats normally, use the cooktop with care and watch the display. If the code returns, put the cooktop out of use. A control that cannot be trusted to switch areas on and off is a risk over a hot surface. Leave the breaker off until the touchpad, the board and the wiring have been tested.

What you can safely check

  1. Make sure every cooking area is off, then wipe the glass clear.
  2. Turn the breaker off and give it one full minute.
  3. Turn the breaker on again.
  4. Stay nearby for another minute, watching for F40.
  5. Try a single cooking area; should the code come back, leave the cooktop alone and call us.

What our technician does for F40

  • Test the touchpad, the board and the connections before recommending a part
  • Be frank about whether repair is worthwhile on an older cooktop
  • Get your approval of the price first

How to keep F40 from coming back

  • Keep the touchpad dry and wipe it only with the controls switched off.
  • Report a flicker or a surge when it happens, since a power disturbance can upset the electronics.
  • Avoid pressing keys repeatedly while the code is showing; reset once and watch.

Technical reference

Code
F40
Appliance
Whirlpool cooktop
Control family
Older Whirlpool radiant smoothtop cooktops
Checked
November 2026

Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.

FAQ

F40 questions

What does F40 tell me about my Whirlpool cooktop?

It comes from the control side. Three areas are named as possibilities: the touchpad, the power control board and the wiring. A power reset is the first step, and no single part is singled out.

Can a breaker reset cure F40?

In some cases. If the code stays away through a minute of watching, the reset worked. A code that returns shows the cause persists, and the controls then need testing.

Is an older cooktop with F40 worth repairing?

Frequently, since touchpads and power boards can be repaired. The price comes in writing first, with an honest word if replacing the cooktop makes more sense.

Can F40 be cleared more than once?

One reset to see whether it holds is reasonable. If F40 keeps returning, more resets only delay the testing, so it is better to have the touchpad, board and wiring checked.

Why can't the code name one part?

Because the guidance lists three areas together, and a reset does not reveal which of them is responsible. Only testing shows which one it is on your cooktop.

Need help with F40?

We trace the cause in your home first and write the price down before any part is swapped.

Call Book a Repair
Call (813) 565-3059 Book a Repair