Whirlpool Older Smoothtop Cooktop F60: Touch Control Check
On older Whirlpool smoothtop cooktops, F60 means the control saw trouble at the touchpad end of the circuit. Whirlpool names the pad and its wiring and suggests a reset first.
What does Whirlpool cooktop code F60 mean?
Trouble at the touchpad end of the circuit is what the control has reported when F60 shows on an older Whirlpool radiant smoothtop cooktop. Whirlpool names the touchpad (user interface) and its wiring, and suggests a reset first. The touch keys may stop working while the code is up. These older cooktops are still repaired.
F60 at a glance
- Code
- F60
- Appliance
- Whirlpool cooktop
- Applies to
- Older Whirlpool radiant smoothtop cooktops
- Type
- Needs attention soon
- Can you clear it yourself?
- Sometimes, after the safe checks below
- Most likely cause
- A touchpad that is no longer reporting presses properly
What you may notice with F60
- F60 shows on the display and the touch keys may stop working.
- Presses register slowly or not at all.
- A reset may restore the keys for a while.
- A returning code means the pad or its wiring needs testing.
How the cooktop detects F60
The keys you press on this cooktop belong to the touchpad. It reads each touch and passes it, through wiring, to the electronics that run the cooking areas. F60 appears when the control reports a problem at that touchpad end, and the guidance gives two suspects: the pad itself, or the wiring that serves it.
The suggested first step is to cut power at the breaker. That restarts the electronics and clears a temporary glitch, which is why a code that does not return afterward can be left alone. A code that returns tells you the problem is real, though not which of the two suspects it is. Testing the touch controls and then the connection behind them separates the two, so a part is only ordered when the test supports it.
Likely causes of F60
- A touchpad that is no longer reporting presses properly
- Wiring serving the touchpad that has worn or come loose
- A brief upset that cycling power clears
Can you keep using the cooktop with F60?
If F60 clears after the reset and the touch keys respond normally, the cooktop can be used while you watch for a repeat. If the code returns, do not use it any further. Keys that cannot be trusted might fail to switch a cooking area off, and that matters over a hot surface. Switch the breaker off and have the touchpad and its wiring tested.
What you can safely check
- Check that all cooking areas are off, and wipe the glass clean and dry.
- Keep the cooktop's breaker off for a full minute.
- Restore the breaker.
- Observe the screen for a further minute.
- When F60 shows again, leave the cooktop idle and call us.
What our technician does for F60
- Test the touch controls, then the connection behind them
- Get your approval of a written price first
- Be candid if an older cooktop is not worth the repair
How to keep F60 from coming back
- Keep the glass dry and wipe it only with the controls switched off.
- Avoid pressing keys repeatedly when they seem slow.
- Tell the technician whether the keys were acting up before F60 appeared.
Technical reference
- Code
- F60
- Appliance
- Whirlpool cooktop
- Control family
- Older Whirlpool radiant smoothtop cooktops
- Maker documentation
- Whirlpool owner manuals and support
- Checked
- November 2026
Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.
Related Whirlpool cooktop error codes
F60 questions
How would you describe F60 on a Whirlpool cooktop?
As a code that concerns the touchpad. The published guidance lists the user interface and its wiring, then advises removing power at the breaker for a minute.
Could moisture bring on F60?
Liquid sitting on the glass can confuse touch keys, so wipe the surface dry as a first move. Moisture is not among the listed causes for this code, so a code that lingers leads to testing the controls.
Are touchpads on older cooktops replaced?
Yes, once testing shows the touchpad is the cause. The price comes in writing before any part is ordered.
Can wiping the panel help with F60?
A clean, dry panel never hurts. The guidance for this code points to the touchpad or its wiring, though, not to dirt, so if it persists after drying and one reset, the touch controls need testing.
What happens if F60 is ignored?
If it keeps returning, the touchpad or its wiring is still not working correctly, and the keys may become unreliable over a hot surface. Leaving the cooktop off until it is tested is the safer choice.
Need help with F60?
We trace the cause in your home first and write the price down before any part is swapped.