Whirlpool Older Smoothtop Cooktop F42: Power-Side Control Message
F42 appears on older Whirlpool smoothtop cooktops when the control finds trouble on the side that delivers power to the cooking areas. Cycle the breaker once and watch what the display does.
What does Whirlpool cooktop code F42 mean?
On older Whirlpool radiant smoothtop cooktops, F42 is the control's way of reporting trouble on the power side of the unit. The reset instructions point to the power control board and its wiring, and to nothing else. The cooking areas can stay cold while the code is up. It is an older style of code, and one power reset at the breaker is the first thing to try.
F42 at a glance
- Code
- F42
- Appliance
- Whirlpool cooktop
- Applies to
- Older Whirlpool radiant smoothtop cooktops
- Type
- Needs attention soon
- Can you clear it yourself?
- Sometimes, after the safe checks below
- Most likely cause
- A power control board that has developed a problem of its own
What you may notice with F42
- F42 shows on the display of the cooktop.
- The cooking areas stay cold even when switched on.
- A breaker reset may clear the code for a while.
- The code returns if the board or wiring is the cause.
How the cooktop detects F42
A radiant smoothtop splits its electronics in two. The keypad takes your commands, and a separate board switches the heavy current out to the cooking areas. Wires tie that board to everything else. F42 is raised when the control reports a problem on this power side.
The guidance names only the board and its wiring, so the code can say little more than that. A one-off electrical event can confuse the board for a moment, and cutting power at the breaker lets it restart cleanly. If the code stays away after a minute of watching, the event passed. If F42 comes back, the board or a wire attached to it is where to look, but a technician has to inspect the connections and test the board to know which.
Likely causes of F42
- A power control board that has developed a problem of its own
- A wire or terminal feeding that board that no longer makes good contact
- A one-off electrical event that cycling the breaker clears
Can you keep using the cooktop with F42?
If F42 stays gone after the reset and every cooking area heats normally, you can use the cooktop, keeping an eye on the display. If it returns, stop. A clean display after the reset is the sign you want; a repeat means the power side is still reporting trouble, and cooking on it is a risk. Leave the cooktop off at the breaker until the board and wiring have been tested.
What you can safely check
- Confirm that every control is off before you go near the breaker.
- Flip the cooktop's breaker down, wait sixty seconds, then flip it up.
- Read the display for about a minute and note whether F42 returns.
- If the display stays clear, test the cooking areas one after another.
- When F42 returns, leave the cooktop off and call us.
What our technician does for F42
- Inspect the connections, then bench-test the power board before a part is suggested
- Be straightforward about whether a repair suits an older cooktop
- Write the price down before any work begins
How to keep F42 from coming back
- Keep spills and steam away from the edges of the cooktop where moisture can reach the wiring.
- Report flickering lights or a power surge, since an electrical event can upset the board.
- Avoid repeated resets; one reset and a minute of watching tells you whether the code is lasting.
Technical reference
- Code
- F42
- Appliance
- Whirlpool cooktop
- Control family
- Older Whirlpool radiant smoothtop cooktops
- Maker documentation
- Whirlpool owner manuals and support
- Checked
- November 2026
Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.
Related Whirlpool cooktop error codes
F42 questions
Where does F42 come from on a Whirlpool cooktop?
It belongs to the control family and concerns the board that powers the cooking areas and its wiring. Whirlpool's single instruction: remove power at the breaker for sixty seconds and see whether the code comes back.
May I cook after F42 clears?
Yes, provided the code stays gone and every cooking area heats normally. Stop using the cooktop if F42 returns, so the board and connections can be checked.
Can the board be tested without replacing it?
Yes. Connections are inspected first and the board is tested, so a part is ordered only when the results point to it.
Does F42 always mean the board has failed?
No. The guidance names the board and its wiring as possible areas, and a reset can clear a one-off electrical event. Only testing shows whether the board, the wiring or neither is responsible on your cooktop.
What can I tell you on the phone about F42?
Give the code, whether the cooking areas stay cold, and whether it appears right at start-up. Those details help the technician decide where to start with the board and its connections.
Need help with F42?
We trace the cause in your home first and write the price down before any part is swapped.