Whirlpool Cooktop FC RR Means Right Rear Element or Wiring
On a Whirlpool electric radiant smoothtop, the display reading FC RR points to the right rear hotplate and the wiring connected to it. A breaker reset is the first instruction.
What does Whirlpool cooktop code FC RR mean?
The display of a Whirlpool electric radiant smoothtop cooktop can read FC RR when the right rear hotplate, which is the cooking surface or element, or the wiring connected to it needs attention. The first instruction is to reset power at the breaker. While the code stays on, the right rear area may remain cold, even though the control still looks alive.
FC RR at a glance
- Code
- FC RR
- Appliance
- Whirlpool cooktop
- Applies to
- Whirlpool electric radiant smoothtop cooktops
- Type
- Needs attention soon
- Can you clear it yourself?
- Sometimes, after the safe checks below
- Most likely cause
- Right rear hotplate (element) not heating on command
What you may notice with FC RR
- FC RR is visible on the display
- The right rear area may stay cold when switched on
- Other areas may keep working normally
How the cooktop detects FC RR
Under the glass at the right rear of a smoothtop sits a hotplate with its own wiring to the control. Whenever that cooking area is turned on, the control sends power and relies on the element to take it in the normal way. The display shows FC RR when the control sees that this circuit, either the element or the wires feeding it, is not behaving as it should.
The code stays tied to the right rear position, so it does not say which part has failed, only where the control noticed the trouble. Cutting power at the breaker lets the control restart and test the circuit afresh. If the circuit passes, the code stays away; if not, FC RR comes back as soon as the control checks again.
Likely causes of FC RR
- Right rear hotplate (element) not heating on command
- Wiring tied to the right rear element
- A passing glitch that cycling power clears
Can you keep using the cooktop with FC RR?
Treat the right rear area as unusable until it has been tested, whatever the display says. You may use other areas if they heat correctly, but stay close and watch for odd behavior. If an area stays hot after being switched off, turn the breaker off at once. Also give the glass time to cool before wiping it, because a switched-off cooktop can still burn.
What you can safely check
- Turn off all cooking areas and give the glass time to cool fully.
- Leave the breaker for the cooktop off for one minute and then restore it.
- Stay near the display for a minute to see whether FC RR shows again.
- If it is gone, warm a pan of water briefly on the right rear area.
- If the code returns or that area never warms, stop using it and call us.
What our technician does for FC RR
- Look over the right rear hotplate and the wiring that feeds it
- Test the element and the wiring to tell them apart
- Explain the result and give a written price before replacing a part
How to keep FC RR from coming back
- Lift pans instead of dragging them, so the glass and the area around each element stay in good shape.
- Wipe boil-overs once the glass is cool, since baked-on spills can hide changes you should notice.
Technical reference
- Code
- FC RR
- Appliance
- Whirlpool cooktop
- Control family
- Whirlpool electric radiant smoothtop cooktops
- Maker documentation
- Whirlpool owner manuals and support
- Checked
- November 2026
Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.
Related Whirlpool cooktop error codes
FC RR questions
Which cooking position is behind FC RR?
The letters name the right rear position. Its hotplate and the wiring connected to it are the two things the guidance asks you to consider.
Should I worry if FC RR vanishes after the reset?
Not much. The reset could have removed a one-time glitch, so cook as normal and keep watching the display. Tell us if the code appears again, since a repeat means something real is behind it.
Could a worn element be the reason?
It could. The guidance lists the hotplate along with the wiring, and we test both so that you pay only for a part the test actually supports.
Is FC RR connected to the other position codes?
They belong to one family, with a separate code for each cooking position. Each one points to its own hotplate and wiring, so FC RR concerns only the right rear and not the other areas.
What happens if I keep using an area that shows FC RR?
The code means the control has noticed trouble in that circuit, so using the area anyway could mean uneven or no heat. Stop using it until the element and wiring have been tested.
Need help with FC RR?
We trace the cause in your home first and write the price down before any part is swapped.