(813) 565-3059 Book a Repair
Whirlpool cooktop error code

Whirlpool Cooktop FC LF Code: Left Front Element and Wiring

FC LF, shown by a Whirlpool electric radiant smoothtop, concerns the left front cooking area. It points at that hotplate or the wiring feeding it, and a breaker reset is the first step.

Needs attention soonChecked November 2026

What does Whirlpool cooktop code FC LF mean?

On a Whirlpool electric radiant smoothtop cooktop, FC LF means attention is needed at the left front hotplate, which is the element under the glass, or at the wiring that supplies it. The guidance starts with a power reset at the breaker. With the code displayed, the left front cooking area may stay cold. The other areas are not named by the code, so they may still work normally.

FC LF at a glance

Code
FC LF
Appliance
Whirlpool cooktop
Applies to
Whirlpool electric radiant smoothtop cooktops
Type
Needs attention soon
Can you clear it yourself?
Sometimes, after the safe checks below
Most likely cause
Left front hotplate (element) no longer heating as the control expects

What you may notice with FC LF

  • FC LF shows on the display
  • The left front cooking area stays cold or heats weakly
  • Other cooking areas may still heat as normal

How the cooktop detects FC LF

Each cooking area on a radiant smoothtop has its own hotplate under the glass, wired back to the main control. The control sends power to the element and expects it to respond in a normal way. FC LF is how the cooktop reports that something about the left front position, either the hotplate or the wiring that feeds it, is not responding as expected.

Because the code is tied to one position, the control does not need to shut down the whole cooktop. That is why the other areas may keep heating. A power reset at the breaker makes the control start fresh and test the left front circuit again. If the condition is gone, the code clears, and if not, FC LF returns.

Likely causes of FC LF

  • Left front hotplate (element) no longer heating as the control expects
  • Wiring or connection running to the left front element
  • A momentary control glitch that a power cycle removes

Can you keep using the cooktop with FC LF?

The other cooking areas may be used with care if they heat normally, but treat the left front area as off until it has been tested. Turn the breaker off if a control acts strangely, for example if an area stays hot after you switch it off. A hot glass surface stays dangerous after the display goes dark, so keep children and towels clear until it has cooled.

What you can safely check

  1. Turn off every cooking area and let the glass cool completely.
  2. Switch the cooktop's breaker off, wait one minute, and switch it back on.
  3. Keep an eye on the display for a minute and see whether FC LF reappears.
  4. If it stays away, set a pan of water on the left front area to see whether it heats.
  5. If the code returns or the area stays cold, stop using that area and call us.

What our technician does for FC LF

  • Test the left front element for a proper reading
  • Check the wiring and the connection from that element to the control
  • Replace the element or repair the connection once the test shows which one failed

How to keep FC LF from coming back

  • Set pans down gently and lift them rather than dragging, which protects the glass above each hotplate.
  • Wipe up boil-overs once the glass has cooled so residue does not bake on around the cooking areas.

Technical reference

Code
FC LF
Appliance
Whirlpool cooktop
Control family
Whirlpool electric radiant smoothtop cooktops
Checked
November 2026

Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.

FAQ

FC LF questions

Which cooking area does FC LF refer to?

The letters name the left front position. The guidance ties the code to that hotplate and the wiring feeding it, so the check starts there after the breaker reset.

May I keep cooking on the other areas with FC LF showing?

If they heat normally, use them carefully and watch the display. Stop using the whole cooktop if FC LF keeps returning or another area starts acting oddly, until it has been tested.

Can I tell by looking whether the element or the wire is bad?

No. Both sit under the glass or behind the panel, and a failed element looks like a healthy one. Only a test shows which part needs replacing.

Does FC LF mean the whole cooktop is failing?

No. The code is tied to one cooking position, so the rest of the cooktop is not named. If other areas also show codes or behave oddly, mention that when you describe the problem.

Is FC LF the same as the other position codes on this cooktop?

The family is the same, with one code per cooking position, and each letter pair marks a different area. The left front code points to the left front hotplate and its wiring only.

Need help with FC LF?

We trace the cause in your home first and write the price down before any part is swapped.

Call Book a Repair
Call (813) 565-3059 Book a Repair