(813) 565-3059 Book a Repair
Whirlpool cooktop error code

Whirlpool Older Smoothtop Cooktop F43: Control Circuit Message

F43 on an older Whirlpool smoothtop cooktop shows that the control has spotted a problem in its own power circuit. One breaker reset is the first step, and a returning code needs testing.

Needs attention soonChecked November 2026

What does Whirlpool cooktop code F43 mean?

When F43 appears on an older Whirlpool radiant smoothtop cooktop, the control has spotted a problem in its own power circuit. The published list is short: the board that powers the cooking areas, and the wiring around it. Start with a power reset. The cooking areas may not heat while the code is showing, and we service this older style.

F43 at a glance

Code
F43
Appliance
Whirlpool cooktop
Applies to
Older Whirlpool radiant smoothtop cooktops
Type
Needs attention soon
Can you clear it yourself?
Sometimes, after the safe checks below
Most likely cause
A board that powers the cooking areas and has developed a problem

What you may notice with F43

  • F43 appears and the cooking areas may not heat.
  • The glass is clean, so dirt is not the reason.
  • A reset may clear the code once.
  • A repeat points to the power circuit itself.

How the cooktop detects F43

Power for the cooking areas of a radiant smoothtop flows through one board, and wiring connects that board to the elements and the keypad. The control watches this power circuit all the time. When it senses a problem there, it puts F43 on the display and may stop the cooking areas from heating.

Resetting reveals just one thing: whether the condition persists. It says nothing about the reason. Switching off at the breaker lets the board restart; if the code does not return, a one-time electrical disturbance was the likely cause. If F43 comes back, a board that has gone wrong or a loose or damaged wire has to be found, which means tracing the wiring and testing the board directly.

Likely causes of F43

  • A board that powers the cooking areas and has developed a problem
  • Wiring around that board that has loosened or been damaged
  • A single electrical disturbance that has passed

Can you keep using the cooktop with F43?

If F43 does not return after the reset and each cooking area heats normally, careful use is reasonable. If it shows again, stop using the cooktop. The control is reporting a problem in its own power circuit, and loose or damaged wiring is not something to cook on. Switch the breaker off and have the board and wiring tested.

What you can safely check

  1. Switch all controls off and walk to the breaker.
  2. Take the cooktop's breaker to off, leave it a full minute, then restore it.
  3. Remain beside the cooktop for sixty seconds, watching for F43.
  4. With a normal display, check each cooking area in turn.
  5. When F43 reappears, leave the cooktop idle and call us.

What our technician does for F43

  • Follow the wiring and test the board to find which part is involved
  • Show you the written price before work begins
  • Tell you openly if repairing this older cooktop would not be sensible

How to keep F43 from coming back

  • Keep liquids away from the cooktop edges so moisture cannot creep toward the wiring.
  • Mention any electrical disturbance, such as a flicker, that came just before the code appeared.
  • Reset only once and observe; repeating resets will not reveal the cause.

Technical reference

Code
F43
Appliance
Whirlpool cooktop
Control family
Older Whirlpool radiant smoothtop cooktops
Checked
November 2026

Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.

FAQ

F43 questions

What is the control seeing when F43 appears?

A problem inside its own power circuit. Whirlpool points to the board and the wiring and asks for a power reset at the breaker first.

Will wiping the glass clear F43?

Wiping is harmless, but this code is not a dirt message like some others. If it persists past a reset, the circuit needs testing.

Are older Whirlpool cooktops with F43 still worked on?

Yes. Cooktops many years old get repaired. When the numbers say a repair is a poor use of your money, you hear that before spending anything.

Does F43 mean the same thing as the other power-circuit codes?

Several older smoothtop codes mention a similar board and wiring, but each is a separate message. The cooktop's behavior and the test results decide the actual cause.

Can a one-time disturbance really cause F43?

Yes. A brief electrical event can confuse the circuit, and a power reset clears it. If the code returns, the disturbance was not the whole story, and the board or wiring needs checking.

Need help with F43?

We trace the cause in your home first and write the price down before any part is swapped.

Call Book a Repair
Call (813) 565-3059 Book a Repair