Whirlpool Smoothtop Cooktop Indicator Lights Not Turning On: Dark Controls
A Whirlpool smoothtop cooktop with dark indicator lights is showing nothing at all. Either power is not arriving or the cooktop's control side is not starting up.
What does Whirlpool cooktop code Indicator Lights Not Turning On mean?
A Whirlpool electric radiant smoothtop cooktop whose indicator lights stay dark has a display that is completely off. Troubleshooting steps for this condition are missing from the owner's manual, which means it gets diagnosed on site. Put simply, either power is not reaching the cooktop or the control side is not starting up. A code cannot appear because nothing is lit to show it.
Indicator Lights Not Turning On at a glance
- Code
- Indicator Lights Not Turning On
- Appliance
- Whirlpool cooktop
- Applies to
- Whirlpool electric radiant smoothtop cooktops
- Type
- Needs attention soon
- Can you clear it yourself?
- Sometimes, after the safe checks below
- Most likely cause
- Cooktop breaker that has tripped or been left off
What you may notice with Indicator Lights Not Turning On
- Indicator lights and display stay completely dark
- No error code appears anywhere on the panel
- Touching the keys produces no response at all
- Cooking areas cannot be turned on
How the cooktop detects Indicator Lights Not Turning On
Unlike most problems on a smoothtop, a completely dark panel gives the cooktop nothing to report with. The indicator lights and display only come alive when the touch control receives power and starts up normally. If either step fails, the panel stays dark, and there is no code, because the part that would show the code is the part that is off.
Two broad possibilities remain. The first is a supply problem, such as a breaker that has tripped or power that never reaches the cooktop. The second is on the cooktop itself, where the touch control or its power board does not start. Since the panel gives no hint, a technician measures the incoming power first and then tests the control.
Likely causes of Indicator Lights Not Turning On
- Cooktop breaker that has tripped or been left off
- Power that is not reaching the cooktop
- Touch control or its power board that is not starting up
Can you keep using the cooktop with Indicator Lights Not Turning On?
Without any lights you cannot tell whether an area is on, so do not try to cook. Check the breaker once and, if the lights return, use the cooktop normally with a watchful eye. If a breaker trips again, leave it off, because a repeat trip points to an electrical problem. Never open the cooktop or touch wiring to look for the cause.
What you can safely check
- Make sure every cooking area is off, then take anything off the glass by the control panel and dry the panel.
- Open your breaker box and look for a cooktop breaker that is off or tripped.
- If you find it that way, switch it fully off and on once.
- If the lights stay dark, stop resetting.
- Call us and say that nothing lights up.
What our technician does for Indicator Lights Not Turning On
- Measure the power arriving at the cooktop before testing anything else
- Test the touch control and the board that powers it
- Report which side the repair belongs to, supply or cooktop, with the price in writing
How to keep Indicator Lights Not Turning On from coming back
- Keep spills off the control panel so liquid cannot get under the touch keys and disturb the control.
- Avoid running several large appliances on the same circuit as the cooktop if your breaker has tripped before.
Technical reference
- Code
- Indicator Lights Not Turning On
- Appliance
- Whirlpool cooktop
- Control family
- Whirlpool electric radiant smoothtop cooktops
- Maker documentation
- Whirlpool owner manuals and support
- Checked
- November 2026
Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.
Related Whirlpool cooktop error codes
Indicator Lights Not Turning On questions
Is a completely dark display an error code?
No, it is not a code at all. The display is simply dark, and the owner's manual gives no step-by-step guidance for it. A technician starts by checking the power that reaches the cooktop.
Is it all right to reset the breaker more than once?
One off-and-on cycle does no harm. Repeated flipping may mask the real problem, while a breaker that keeps tripping points to an electrical issue that should be tested.
Could the cause be my house wiring instead of the cooktop?
It could be either one. A technician measures what the supply delivers before blaming any part, which shows whether the repair belongs to the house or to the cooktop.
Does a dark display always mean the cooktop is broken?
No. A tripped breaker is a common household cause and costs nothing to check. If the breaker is on and the panel is still dark, the cooktop's controls or its supply need testing.
What should I tell the technician when nothing lights up?
Say that the cooktop is an electric radiant smoothtop, that no lights appear at all, and whether the breaker was off or tripped. Mention if it tripped again after you switched it back on.
Need help with Indicator Lights Not Turning On?
We trace the cause in your home first and write the price down before any part is swapped.