(813) 565-3059 Book a Repair
Whirlpool cooktop error code

Whirlpool Induction Cooktop E_22: Internal Alert, Cut Power and Cool Down

E_22 on a Whirlpool induction cooktop is an internal alert that names no burner, pan or sensor. The advice is brief: cut power, allow a cool-down, restore power and observe.

Needs attention soonChecked November 2026

What does Whirlpool cooktop code E_22 mean?

A flashing E_22 on a Whirlpool induction cooktop such as the WCI55US0JS reports an internal alert, and no burner, pan or sensor is named. Whirlpool's guidance is brief: remove power, let the cooktop cool, switch power back on, and watch. One appearance after a power flicker may clear for good. If E_22 returns, a technician needs to read the control or one of its circuits.

E_22 at a glance

Code
E_22
Appliance
Whirlpool cooktop
Applies to
Whirlpool induction cooktops (WCI55US0JS)
Type
Needs attention soon
Can you clear it yourself?
Sometimes, after the safe checks below
Most likely cause
Brief glitch in the electronics when the power flickered

What you may notice with E_22

  • E_22 flashes on the display, with no burner or pan named.
  • The cooktop stops heating when the code appears.
  • The code showed up after a power flicker.
  • A reset and a cool-down remove the code for a while.

How the cooktop detects E_22

The control of an induction cooktop keeps an eye on its own circuits while it heats a pan. When one of those checks fails, it shows an alert code. Some codes name a pan problem or a heat limit, but E_22 does not name anything, so the display gives no direct clue.

Whirlpool's advice therefore concentrates on the simplest events that could explain it: a brief disturbance when power flickers, or heat that has not yet left the electronics. Cutting power restarts the control, and a cool-down removes the heat. If the code stays away afterward, the event was probably temporary. If E_22 returns, the control is seeing the same problem again, and a technician has to trace which circuit raises it.

Likely causes of E_22

  • Brief glitch in the electronics when the power flickered
  • Cooktop still warm from heavy cooking
  • Control circuit that repeats the alert

Can you keep using the cooktop with E_22?

If E_22 appeared once after a power flicker and stays away after a reset and a cool-down, careful use is reasonable. Watch the display while you cook. If it returns, stop using the cooktop, because a control that keeps raising an alert it does not explain should be tested before you rely on it.

What you can safely check

  1. Switch every zone off.
  2. Turn the cooktop's breaker off, count slowly to sixty, then flip it on.
  3. Let the cooktop cool down before you cook again.
  4. Keep power on for a minute and watch for E_22.
  5. Should it show again, stop and note what you were doing at the time.

What our technician does for E_22

  • Trace which circuit is involved, because the code does not say
  • Record whether E_22 appears at start-up, under load or once the cooktop is hot
  • Explain the pricing in writing before work

How to keep E_22 from coming back

  • Let the cooktop cool before using it again after heavy cooking.
  • Keep the area around the cooktop open so the electronics can shed heat.
  • Pay attention to the moment E_22 appears, whether at start-up, under load or after heating.

Technical reference

Code
E_22
Appliance
Whirlpool cooktop
Control family
Whirlpool induction cooktops (WCI55US0JS)
Checked
November 2026

Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.

FAQ

E_22 questions

Is a broken burner behind E_22?

Not by itself, because the code names no burner or part. It is a general alert, and a power reset is the only step suggested to owners.

What is the point of letting the cooktop cool?

Heat in the electronics can set off alerts. Cooling the cooktop before the next use removes that factor and tells you whether the code is real.

When should I get help with E_22?

Once it returns even after a reset and a cool-down, because it is no longer a one-off. At that point the control and its wiring get tested, and you are not left guessing.

Could a power flicker cause E_22?

Yes, a brief disturbance on the supply can set an internal alert, and a single appearance after a flicker may clear for good. The guidance cannot confirm it, so a code that returns still needs testing.

What should I note down about E_22?

Note whether it showed at start-up, while a pan was heating, or after the cooktop had been on for a while. Those details tell us which circuit to examine first, since the code does not name one.

Need help with E_22?

We trace the cause in your home first and write the price down before any part is swapped.

Call Book a Repair
Call (813) 565-3059 Book a Repair