(813) 565-3059 Book a Repair
Whirlpool cooktop error code

Whirlpool Induction Cooktop E_35: General Alert, Reset and Retest

E_35 on a Whirlpool induction cooktop has one published instruction, a power reset. It does not say which sensor or circuit raised it, so a repeat means the cooktop needs checking, not more use.

Needs attention soonChecked November 2026

What does Whirlpool cooktop code E_35 mean?

E_35 can appear on Whirlpool induction cooktops such as the WCI55US0JS, yet the only instruction published is a power reset. Which sensor or circuit raised the alert is not stated. We therefore handle it as an internal alert: cut power and let the cooktop cool, then see whether it stays away. A display that repeats E_35 means the cooktop should be checked instead of used.

E_35 at a glance

Code
E_35
Appliance
Whirlpool cooktop
Applies to
Whirlpool induction cooktops (WCI55US0JS)
Type
Needs attention soon
Can you clear it yourself?
Sometimes, after the safe checks below
Most likely cause
Short-lived electronic alert that a reset removes

What you may notice with E_35

  • E_35 appears on the display with no pan or burner named.
  • The cooktop may stop heating when it shows.
  • A reset clears the code for a time.
  • The code comes back during a later cooking session.

How the cooktop detects E_35

The control of the cooktop monitors its own circuits continuously and shows a code when a check falls outside what it expects. Many codes point to a pan, a heat limit or a keypad. E_35 does not. Whirlpool publishes a power reset and nothing else.

That leaves a simple logic. A short-lived event, such as a disturbance on the supply, will pass once power is cut and restored, and the cooktop will carry on normally. Heat left in the electronics from earlier cooking could also trigger an alert that disappears after a cool-down. A condition that is still present keeps raising the code, and then the control or one of its circuits has to be read directly by a technician.

Likely causes of E_35

  • Short-lived electronic alert that a reset removes
  • Heat still in the cooktop when the alert occurred
  • Circuit in the control that raises the same flag again

Can you keep using the cooktop with E_35?

After one E_35 that clears with a reset and a cool-down, careful cooking is reasonable if you stay nearby. A code that comes back during cooking should be treated as real. Stop using the cooktop if E_35 returns, since nobody can say from the display what condition the control is flagging.

What you can safely check

  1. Turn all controls off and allow the glass to cool.
  2. Shut the breaker for a whole minute, then turn it back on.
  3. Do not cook until the cooktop has cooled.
  4. Stay close for a minute and see whether E_35 comes back.
  5. Should it return, keep the cooktop off and phone us.

What our technician does for E_35

  • Trace the circuit that raises the alert, since nothing is named
  • Check whether the alert follows heat, a particular zone or the quality of the power
  • Give a written price before work

How to keep E_35 from coming back

  • Let the cooktop cool between long cooking sessions.
  • Keep the area around the cooktop open so heat can leave the electronics.
  • Note whether E_35 shows with heat, with one zone or after a power event.

Technical reference

Code
E_35
Appliance
Whirlpool cooktop
Control family
Whirlpool induction cooktops (WCI55US0JS)
Checked
November 2026

Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.

FAQ

E_35 questions

Which part does E_35 name?

Whirlpool publishes no part. This is a general alert, so when a reset does not settle it, we examine the control and its wiring.

How long do I wait before deciding it is gone?

Watch the display during the minute after power returns, then carry on cooking. If it comes back while you are cooking, treat it as a genuine problem.

May I keep resetting it?

One reset, or two, is fine. When E_35 keeps coming back, further resets only delay finding the cause, and reading the circuit once beats guessing.

Does E_35 mean something expensive has failed?

Not necessarily. The code names no part, so it may be a short-lived event that a reset clears. If it keeps returning, we test the circuits and explain what the testing shows before any decision is made.

Could power quality cause E_35?

It is one of the things we check, along with heat and a particular zone, because the manual names no cause. A reset after a power event that never returns suggests it was temporary.

Need help with E_35?

We trace the cause in your home first and write the price down before any part is swapped.

Call Book a Repair
Call (813) 565-3059 Book a Repair