(813) 565-3059 Book a Repair
Whirlpool cooktop error code

Whirlpool Smoothtop Cooktop F2: Cooking Area Too Hot to Use

F2 on a Whirlpool smoothtop cooktop in the WCE97US0KS family means a cooking area is still too hot. Remove the pans and let the surface cool, and the code should fade by itself.

Normal status, not a failureChecked November 2026

What does Whirlpool cooktop code F2 mean?

A hot cooking area is what F2 reports on a radiant (smoothtop) Whirlpool cooktop such as model WCE97US0KS. Lift the pans off and wait, and the code should vanish once the surface has cooled. Should you switch the burner on and see F2 return, the area has not cooled enough, so shut it off and wait longer. A code that never clears even after the glass is cold is another matter altogether.

F2 at a glance

Code
F2
Appliance
Whirlpool cooktop
Applies to
Whirlpool radiant smoothtop cooktops, e.g. model WCE97US0KS
Type
Normal status, not a failure
Can you clear it yourself?
Yes, it is a normal message or setting
Most likely cause
Heat remaining in a surface cooking area after earlier use

What you may notice with F2

  • F2 appears on the display while a cooking area is hot.
  • The surface feels hot under your hand after cooking.
  • The code returns when you restart a hot area.
  • It fades by itself as the glass cools.

How the cooktop detects F2

Each cooking area on a smoothtop has a sensor that tells the control how hot the surface is. The control uses that reading to regulate the burner, and also to warn you while the glass remains hot enough to burn. F2 is that warning: it says the surface cooking area is above the level where the cooktop considers it safe to treat as cool.

Because the code follows the heat itself, it fades as the glass cools. Pans on the area, long cooking or an earlier session can all keep the surface hot. Starting a burner again while the area is still hot makes the control show the code again, which is why waiting is the cure. If F2 remains after the glass is cold, the sensor may read high, or a burner may not be switching off properly.

Why F2 appears

  • Heat remaining in a surface cooking area after earlier use
  • A pan that was allowed to overheat on a burner
  • A heat sensor that still reads high once the glass has cooled

Can you keep using the cooktop with F2?

While F2 shows, treat the cooking area as hot and keep hands and cloths away from it. When the glass is cool and the code is gone, cooking can resume at a lower setting. If F2 shows on a completely cold surface, or a burner seems to stay on after you switch it off, stop using that area and turn the breaker off until a technician has tested it.

What you can safely check

  1. Switch the burner off first, then lift the pans away from the hot area.
  2. Wait while the surface cools; the code fades as it does.
  3. If F2 lingers on a cool surface, turn the cooktop's breaker off for sixty seconds and restore it.
  4. Watch the display for a minute.
  5. Use a lower setting from now on; if F2 shows on a completely cold surface, call us.

What our technician does for F2

  • Test the heat sensing for that cooking area when F2 shows on a cold surface
  • Check whether a burner keeps running after it is switched off
  • Give a written price before any part is ordered

How to keep F2 from coming back

  • Switch burners off as soon as cooking ends and lift pans away.
  • Use lower heat settings instead of leaving a pan to overheat on high.
  • Give the surface time to cool before you restart the same cooking area.

Technical reference

Code
F2
Appliance
Whirlpool cooktop
Control family
Whirlpool radiant smoothtop cooktops, e.g. model WCE97US0KS
Checked
November 2026

Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.

FAQ

F2 questions

Is the cooktop broken when F2 appears?

Rarely. The message warns about a hot surface and fades as the glass cools. It is only worrying if it is still there once the glass has gone completely cold.

Why does F2 return as soon as I restart the burner?

The cooking area has not cooled enough yet. Switch it off and allow more time, because a surface that is still hot brings the code straight back.

What would keep F2 showing on a cold cooktop?

A sensor giving a wrong reading, or a burner that never really switches off. Both get tested, and a burner that stays on is worth fixing fast.

Do I need to reset the breaker for F2?

Not at first. Removing the pans and letting the surface cool is the main step. The breaker reset is only for a code that lingers once the glass is cold, and it should be done once, not repeatedly.

How long does F2 take to disappear?

It follows the surface temperature, so it depends on how hot the area was and how long it was in use. It fades as the glass cools, and nothing is gained by pressing keys while you wait.

Something else going on with your cooktop?

We trace the cause in your home first and write the price down before any part is swapped.

Call Book a Repair
Call (813) 565-3059 Book a Repair