(813) 565-3059 Book a Repair
Whirlpool cooktop error code

Whirlpool Induction Cooktop E_3: Too Hot or an Empty Pan

E_3 on a Whirlpool induction cooktop means the electronics ran too hot and the control panel switched off, or an empty pan was left on a cooking area. Either way, the cooktop needs to cool first.

Stop using it until checkedChecked November 2026

What does Whirlpool cooktop code E_3 mean?

E_3 on the display of a Whirlpool induction cooktop like the WCI55US0JS can mean one of two things. The electronics may have overheated and shut the control panel off, or an empty pan or pot may have been left on a cooking area once the cooktop was started. In both cases cooling comes first. Turn the burner off and then look at what was on it.

E_3 at a glance

Code
E_3
Appliance
Whirlpool cooktop
Applies to
Whirlpool induction cooktops (WCI55US0JS)
Type
Stop using it until checked
Can you clear it yourself?
No, stop using it until it is checked
Most likely cause
Empty pot or pan left heating on a cooking area

What you may notice with E_3

  • The cooktop switches itself off and E_3 appears.
  • A pan or pot with nothing in it was left on a cooking area.
  • The cooktop and pan are very hot.
  • The code returns even with food in a pan on a cool cooktop.

How the cooktop detects E_3

Induction heats the pan directly, and an empty pan has nothing to absorb that energy, so its temperature climbs very quickly. The control watches for exactly that, and it also watches the temperature of its own electronics.

When either one runs too hot, the control panel switches itself off to protect the cooktop and shows E_3. That is why the code covers two situations that look different to the owner: a pan left heating with nothing in it, and electronics that have overheated during long use or because air cannot move around the cooktop. A temperature sensor that reports too much heat would give the same result, so a cool cooktop with food in the pan and E_3 still showing points to the sensing.

Likely causes of E_3

  • Empty pot or pan left heating on a cooking area
  • Electronics or a cooking area overheated during long use
  • Ventilation around the cooktop blocked
  • Temperature sensing that reads too high

Can you keep using the cooktop with E_3?

Switch the burner off, remove the pan, and let everything cool all the way before you try again. Add food or water before you start a zone, never an empty pan. If E_3 returns with a normal pan on a cooktop that has cooled, stop using it, because the cooktop may be overheating inside or misreading its temperature, and that needs checking.

What you can safely check

  1. Switch the burner off and lift the pan off the cooking area.
  2. Wait until the cooktop has cooled all the way down.
  3. Turn the breaker off, wait a minute, then restore power.
  4. Check for E_3 once the power has been on for a minute.
  5. Next time, add food or water to the pan before you start the zone. If E_3 returns with a normal pan on a cool cooktop, stop using it and phone us.

What our technician does for E_3

  • Test the temperature sensing if E_3 appears on a cool cooktop with food in the pan
  • Look at ventilation, since a cramped installation holds heat
  • Give a written price first

How to keep E_3 from coming back

  • Never start a zone with an empty pan on it.
  • Keep ventilation around the cooktop clear so heat can leave.
  • Take breaks during very long cooking sessions so the electronics can cool.

Technical reference

Code
E_3
Appliance
Whirlpool cooktop
Control family
Whirlpool induction cooktops (WCI55US0JS)
Checked
November 2026

Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.

FAQ

E_3 questions

Can an empty pan truly cause E_3?

Yes. A pan holding nothing heats extremely fast, so the cooktop treats it as overheating. Take the pan away, let everything cool, then try once more with some food or water in it.

Are E_3 and E_2 the same message?

No, they are separate codes. On this cooktop E_2 points at cookware that is unsuitable, while E_3 is about the cooktop getting too hot, an empty pan included.

What if E_3 appears with an ordinary pan?

That would mean the cooktop is running hot inside or misjudging its own temperature. Stop using it while the sensing and the airflow are checked.

Why does E_3 cover two different situations?

Both lead to overheating, either of the pan or of the electronics, and the control reacts in the same way by shutting down. That is why the first step is always to switch off, remove the pan, and let everything cool.

What should I do after E_3 clears?

Cook again with food or water in the pan. If E_3 comes back with a normal pan on a cool cooktop, the cooktop may be misreading its temperature, and the sensing and the airflow need to be tested.

Need help with E_3?

We trace the cause in your home first and write the price down before any part is swapped.

Call Book a Repair
Call (813) 565-3059 Book a Repair