(813) 565-3059 Book a Repair
Whirlpool cooktop error code

Whirlpool Induction Cooktop E_03: Something Is Pressing the Controls

E_03 on a Whirlpool induction cooktop means the touch panel senses something pressing on it, as if a key were held down. A pot, a spill or a damp cloth on the panel is the likely cause.

Maintenance reminderChecked November 2026

What does Whirlpool cooktop code E_03 mean?

Whirlpool induction cooktops such as the WCI55US0JS show E_03 when something presses on the touch control panel. To the electronics, a spill, a pot, a wet towel or caked-on soil can resemble a key held down, so the cooktop displays the code and declines to heat. Many owners clear it within a minute by drying the control area and resetting power.

E_03 at a glance

Code
E_03
Appliance
Whirlpool cooktop
Applies to
Whirlpool induction cooktops with a touch control panel (WCI55US0JS)
Type
Maintenance reminder
Can you clear it yourself?
Usually, once the care step is done
Most likely cause
Pan or object resting on the control strip

What you may notice with E_03

  • E_03 appears and the cooktop will not heat.
  • A pot, cloth or spill sits on or near the control strip.
  • The glass over the keys looks wet or smeared.
  • The code clears after wiping and a reset, then returns.

How the cooktop detects E_03

There are no knobs on an induction cooktop. The control panel is a smooth glass area that senses a touch through changes in what lies on it, and the electronics cannot tell a finger from anything else that produces the same change.

A wet cloth, a pot resting on the keys, a spill or dried-on food can all produce that change and keep it there. The control then reads it as a key held down for too long. It reacts by showing E_03 and refusing to heat, because a stuck key is a poor basis for managing a burner. Once the panel is clean and dry and the cooktop has restarted after a power reset, the touch sensing normally starts from a clean slate. The code returning on a spotless panel is what points to the control itself.

Why E_03 appears

  • Pan or object resting on the control strip
  • Liquid or food residue lying across the touch keys
  • Moist panel that the control takes for a pressed key
  • Touch control that misreads clean glass

Can you keep using the cooktop with E_03?

E_03 is a prompt to clean, not a danger sign. Wipe the panel dry, take everything off it, and reset power once. If the code stays away, cook as normal and keep towels and pans clear of the controls. If E_03 returns on a clean, dry panel, leave the cooktop off until the touch control has been tested.

What you can safely check

  1. Switch the cooktop off and clear the control area completely.
  2. Wipe the panel with a soft cloth until it is clean and dry.
  3. Shut the breaker for a minute, then bring power back.
  4. Allow the cooktop to cool before it is used again.
  5. Give it a minute and see if E_03 shows up again. Need help with E_03? Tell us if it shows on a clean, dry panel.

What our technician does for E_03

  • Test the touch control when the code comes back on a clean, dry panel
  • Look for moisture that has crept beneath the glass edge
  • Give a written price before replacing anything

How to keep E_03 from coming back

  • Keep towels, pans and utensils off the touch control strip while the cooktop is on.
  • Wipe spills from the panel as soon as the glass has cooled, and dry it completely.
  • In humid weather, make sure steam and condensation do not collect on the control area.

Technical reference

Code
E_03
Appliance
Whirlpool cooktop
Control family
Whirlpool induction cooktops with a touch control panel (WCI55US0JS)
Checked
November 2026

Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.

FAQ

E_03 questions

What is E_03 telling me on an induction cooktop?

The control believes a key is being pressed and held. Nearly always that points to an object resting on the touch panel or a smear across it, not a broken part.

Might a damp cloth be enough to cause it?

Yes, since water on the glass can behave like a fingertip. Dry the panel completely, and while you cook keep towels and pans away from the control strip.

When is it time to stop trying and ask for help?

A code that keeps showing on a panel you have wiped dry points to the touch control itself. We test the control before any part is replaced.

Will E_03 go away when I wipe the panel?

It can, since the most common cause is something on the keys. Wipe the control area dry, take everything off it, and reset power. If it comes back on a clean panel, the touch control may need testing.

Can spilled liquid under the glass edge cause E_03?

Moisture that creeps beneath the glass edge can act like a held key, and you cannot reach it by wiping. If the code persists on a dry surface, we check for moisture and test the control.

Something else going on with your cooktop?

We trace the cause in your home first and write the price down before any part is swapped.

Call Book a Repair
Call (813) 565-3059 Book a Repair