(813) 565-3059 Book a Repair
Whirlpool cooktop error code

Whirlpool Smoothtop Cooktop F0 or F00: Pressure on the Keys

F0 or F00 on a Whirlpool smoothtop cooktop in the WCE97US0KS family means the touch panel senses something pressing on it. Clear and clean the control area, then reset power.

Maintenance reminderChecked November 2026

What does Whirlpool cooktop code F0 or F00 mean?

Something is pressing on the touch controls whenever F0 or F00 shows on a radiant (smoothtop) Whirlpool cooktop like model WCE97US0KS. A forgotten object, a spill or a film of soil on the glass will each do it, because the cooktop reads the pressure as a key held down. Clearing and cleaning the panel, then resetting power, is the remedy, and a replacement part is seldom needed.

F0 or F00 at a glance

Code
F0 or F00
Appliance
Whirlpool cooktop
Applies to
Whirlpool radiant smoothtop cooktops, e.g. model WCE97US0KS
Type
Maintenance reminder
Can you clear it yourself?
Usually, once the care step is done
Most likely cause
An item left lying on the control area

What you may notice with F0 or F00

  • F0 or F00 appears and the cooktop stops responding.
  • An object is lying on the control area, or the glass is wet.
  • The keys feel unresponsive until the panel is cleared.
  • The code can return on a clean panel if the keypad itself is misreading.

How the cooktop detects F0 or F00

A smoothtop cooktop has no knobs. Its keys are sensitive spots under the glass, and the control decides that a key is pressed when it detects the change a fingertip causes. Water, a film of grease, a towel or a pan handle resting on the panel produces the same change, and the control cannot tell the difference.

When a key appears pressed for too long, the control takes it as a held key and stops, displaying F0 or F00. That is a protective choice, since a key that seems stuck could otherwise keep a burner running. Taking away whatever sits on the panel, cleaning the glass and cycling power gives the control a fresh reading. If the code returns on a clean, dry, empty panel, the keypad itself is reporting a press that is not there.

Why F0 or F00 appears

  • An item left lying on the control area
  • A spill or film of soil weighing on the touch keys
  • A touch control that registers a key nobody is pressing

Can you keep using the cooktop with F0 or F00?

Once the panel is clear and the display is clean, cook as normal, and keep towels, pans and utensils away from the controls from now on. If F0 or F00 returns on a clean and empty panel, avoid using the cooktop. A keypad that reads phantom presses may not respond when you try to switch a burner off. Cut power at the breaker while the panel waits for a technician.

What you can safely check

  1. Turn the cooktop off at the controls and switch its breaker off before wiping near the keys.
  2. Lift everything off the control area.
  3. Wipe up spills and debris, then dry the glass completely.
  4. Wait a minute, restore power and read the display.
  5. If F0 or F00 stays on a clean, empty panel, call us.

What our technician does for F0 or F00

  • Test the touch control when the code persists on a clean, empty panel
  • Look for moisture beneath the glass edge close to the keys
  • Give a written price before replacing anything

How to keep F0 or F00 from coming back

  • Keep towels, pans and utensils off the control area while the cooktop is on.
  • Wipe spills from the glass quickly, with the cooktop switched off.
  • Dry the panel fully after cleaning, since moisture can be read as a touch.

Technical reference

Code
F0 or F00
Appliance
Whirlpool cooktop
Control family
Whirlpool radiant smoothtop cooktops, e.g. model WCE97US0KS
Checked
November 2026

Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.

FAQ

F0 or F00 questions

How can a spill bring up F0?

Liquid on the glass resembles a fingertip to the touch keys. The control concludes a key is held and stops. Wiping the panel dry and cycling power usually settles it.

Do F0 and F00 call for different handling?

No. They point to the same pressure on the touch panel, so the cleaning routine is identical whichever one your display shows.

What if the glass is spotless and the code stays?

A clean panel with the code still showing points at the keypad, which may be registering touches that never happened. Its control and wiring are tested before any part is replaced.

Will F0 clear by itself once the object is gone?

Frequently the cooktop recovers as soon as the pressure is removed and power is cycled. If the display still shows the code after a clean-up and a reset, the touch control needs to be tested.

Can I wipe the glass while the cooktop is on?

It is better not to. A wet cloth can press keys by accident and start a burner. Switch the controls off first, clean, then dry the glass before turning anything back on.

Something else going on with your cooktop?

We trace the cause in your home first and write the price down before any part is swapped.

Call Book a Repair
Call (813) 565-3059 Book a Repair