Whirlpool Smoothtop Cooktop Codes F36, F37: Coil Temperature Sensor
F36 and F37 appear together on Whirlpool smoothtop cooktops in the WCE97US0KS family and point to a temperature sensor problem on an induction coil. A power reset is the first step.
What does Whirlpool cooktop code F36, F37 mean?
Whirlpool guidance ties the pair F36 and F37 to possible trouble in a temperature sensor attached to an induction coil, as shown on radiant (smoothtop) cooktops such as model WCE97US0KS. The sensor reports coil heat to the control, which uses it to regulate the coil. Cycling power is the first step. If the codes return, the sensor and the wiring carrying its signal get tested.
F36, F37 at a glance
- Code
- F36, F37
- Appliance
- Whirlpool cooktop
- Applies to
- Whirlpool radiant smoothtops, e.g. model WCE97US0KS
- Type
- Needs attention soon
- Can you clear it yourself?
- Sometimes, after the safe checks below
- Most likely cause
- A coil temperature sensor that reads incorrectly
What you may notice with F36, F37
- F36 and F37 appear together on the display.
- One or more cooking areas may stop heating.
- A reset may clear both codes for a while.
- Returning codes point to the sensor or its wiring.
How the cooktop detects F36, F37
The control cannot see the temperature of a coil directly, so it relies on a small sensor attached to it. The sensor sends a signal along wiring to the control, and the control uses that reading to decide how much power the coil should get. Without a sensible reading, it cannot regulate the heat and has to stop.
F36 and F37 are shown together, and the guidance describes them as a possible problem with this coil temperature sensor. The sensor could be reading incorrectly, the wiring or connector carrying its signal could be loose or damaged, or a passing glitch could have scrambled the signal for a moment. A power reset clears the glitch. If the codes return, the sensor and its wiring are the first things to test.
Likely causes of F36, F37
- A coil temperature sensor that reads incorrectly
- A wire or plug linking the sensor to the control
- A temporary glitch that cycling power clears
Can you keep using the cooktop with F36, F37?
Do not keep using the cooktop while the codes show. A coil whose temperature cannot be read may not be regulated correctly, so the cooktop shuts down to stay safe. After one reset, if both codes are gone and the cooking areas heat normally, careful use is possible. If either code returns, switch the breaker off and leave the cooktop alone.
What you can safely check
- Switch all surface controls off, and give the cooktop time to cool before anything else.
- Take the breaker to off and leave it a full sixty seconds.
- Turn it on again.
- Look for either code over the next minute.
- If either one returns, put the cooktop out of use and call us.
What our technician does for F36, F37
- Before replacing anything, check the sensor and the wiring behind it
- See whether the codes show on every burner or just one
- State the price in writing first
How to keep F36, F37 from coming back
- Avoid slamming pans down on the glass, which can stress parts beneath it.
- Let the cooktop cool before you reset power.
- Note whether the codes appear on every burner or only one, and pass that along.
Technical reference
- Code
- F36, F37
- Appliance
- Whirlpool cooktop
- Control family
- Whirlpool radiant smoothtops, e.g. model WCE97US0KS
- Maker documentation
- Whirlpool owner manuals and support
- Checked
- November 2026
Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.
Related Whirlpool cooktop error codes
F36, F37 questions
Why do F36 and F37 appear together?
Both carry one shared published description, so they are handled as a family. A single reset and a single round of testing cover both codes.
What does the coil sensor actually do?
It reports to the control how warm the coil is. A wrong reading leaves the cooktop unable to regulate heat properly, and the cooktop may stop itself as a precaution.
Will resetting power help with F36 or F37?
A passing glitch could vanish this way. When the codes return, a technician needs to test the sensor or its wiring before any part is ordered.
Is F37 more serious than F36?
The guidance treats them the same way, so there is no basis to rank one above the other. Both point to the coil temperature sensor, and the same test covers each code.
Can the sensor be repaired?
Whether the sensor, its connector or its wiring is the problem is decided by testing. Only the part that tests bad is replaced, and the price is given in writing before the work starts.
Need help with F36, F37?
We trace the cause in your home first and write the price down before any part is swapped.