Whirlpool Induction Performance Boost Flashing: Zone Power Shared
When Performance Boost flashes on a Whirlpool induction cooktop, the function is limited. Only one cooking area per zone can boost, so setting both lowers one of them.
What does Whirlpool cooktop code Performance Boost Flashing mean?
Performance Boost flashing is the induction cooktop's way of saying its boost has been limited. Within a single zone, boost can run on just one of the two cooking areas. Set both, and the area set last holds the boost power while the other settles at a lower level. On its own, the cooktop may also reduce an area to avoid overheating. If nothing is flashing, you can carry on cooking.
Performance Boost Flashing at a glance
- Code
- Performance Boost Flashing
- Appliance
- Whirlpool cooktop
- Applies to
- Whirlpool induction cooktops with Performance Boost
- Type
- Normal status, not a failure
- Can you clear it yourself?
- Yes, it is a normal message or setting
- Most likely cause
- Both areas of one zone set to Performance Boost together
What you may notice with Performance Boost Flashing
- Performance Boost flashes on the display
- One area in the zone cooks at a lower level
- The flashing may follow a very hot pan
How the cooktop detects Performance Boost Flashing
Induction zones share their power. Within one cooktop zone, only a single cooking area may run at the Performance Boost level at any moment. If you ask for boost on both areas, the cooktop gives the boost to the one you set last and drops the other to a lower level, and the flashing tells you that the function is limited.
The control also protects itself and your pan. When an area gets too hot, the cooktop can lower it to avoid overheating, and the same flashing may appear. A pan with a non-magnetic base, one that is narrower than the zone or one that sits off center makes it harder for the zone to work properly, so check the pan before assuming the cooktop has a problem.
Why Performance Boost Flashing appears
- Both areas of one zone set to Performance Boost together
- The cooktop trimming an area to avoid overheating
- A pan that lacks a magnetic base, is undersized or sits off center
- A very hot pan that has to cool first
Can you keep using the cooktop with Performance Boost Flashing?
Yes, you can keep cooking. Flashing means boost is limited, and the cooktop is protecting itself or sharing power within the zone. Set boost on just one area, use a suitable pan and give a very hot pan time to cool. If the display flashes continuously with correct settings, stop pushing the zone and have it tested.
What you can safely check
- Make sure the glass is cool and nothing is stored on it before changing any setting.
- See whether both areas of the zone are set to Performance Boost.
- Leave boost on one area and set the other to a normal level.
- Check the pan: it should be magnetic, wide enough and centered.
- Allow a very hot pan to cool, then turn the area off and on. If the flashing continues with one boost area and a proper pan, call us.
What our technician does for Performance Boost Flashing
- Test the induction zone and its power handling
- Check the temperature sensing that can limit the zone
- Explain what the test shows and quote any repair in writing
How to keep Performance Boost Flashing from coming back
- Use boost on one area of a zone at a time, and leave the second area at a normal level.
- Pick a flat, magnetic pan that fits the zone, and center it before heating.
Technical reference
- Code
- Performance Boost Flashing
- Appliance
- Whirlpool cooktop
- Control family
- Whirlpool induction cooktops with Performance Boost
- Maker documentation
- Whirlpool owner manuals and support
- Checked
- November 2026
Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.
Related Whirlpool cooktop error codes
Performance Boost Flashing questions
What makes Performance Boost flash on an induction cooktop?
Each zone allows boost on only one of its areas at a time. When two are set, the latest keeps boost and the other drops to a lower power level.
Will the cooktop sometimes drop an area to a lower power without being asked?
Yes, it may reduce an area to avoid overheating. That is a protective step, and you can keep cooking as long as the display is not flashing.
When does boost flashing need a technician?
When it keeps flashing even though only one area is on boost and the pan is suitable. Use is then not the cause, so the zone and its sensing need testing.
Does the flashing mean the zone has broken?
No. It tells you boost is limited because both areas were set, or because the cooktop is protecting itself from heat. Only a flash that continues with correct use points to the zone or its sensing.
Which area keeps the boost when I set both?
The later setting wins. That area keeps the boost power, and the other area drops to a lower level. Set boost on just one area, and the flashing should stop.
Something else going on with your cooktop?
We trace the cause in your home first and write the price down before any part is swapped.