Whirlpool Induction Cooktop Shows U-u: No Suitable Pan Found
The display reading U-u tells you a Whirlpool induction cooktop found no suitable pan on the zone you chose. The pan may be the wrong type, off center or too small, and the zone shuts off after 30 seconds.
What does Whirlpool cooktop code U-u mean?
A Whirlpool induction cooktop shows U-u when it cannot find a pan that suits the cooking zone you selected. The pot could be made for another kind of cooktop, could be set down badly, or could be the wrong size for that zone. Should no pot be found within 30 seconds of your selection, the zone turns itself off. In most kitchens the pan is the cause, not a repair.
U-u at a glance
- Code
- U-u
- Appliance
- Whirlpool cooktop
- Applies to
- Whirlpool induction cooktops
- Type
- Normal status, not a failure
- Can you clear it yourself?
- Yes, it is a normal message or setting
- Most likely cause
- A pot or pan not designed for induction cooking
What you may notice with U-u
- U-u shows on the display after you select a zone
- The zone does not heat under the pan
- The zone switches itself off after a short wait
How the cooktop detects U-u
An induction zone heats only when a suitable pan sits on it, because the heat is made in the pan itself. The moment you select a zone, the cooktop looks for a pan whose base is magnetic, wide enough and centered. If it finds none, it shows U-u instead of starting to heat.
The cooktop does not wait forever. If 30 seconds pass after the selection with no pot found, the zone switches off by itself. That is why U-u is a message about the pan and the way it is placed, and why a magnet test and a centered, wider pan fix it in nearly every kitchen. Only a good pan that is still refused makes the detection a question.
Why U-u appears
- A pot or pan not designed for induction cooking
- A pan resting off center on the zone
- A pan narrower than the cooking zone you selected
Can you keep using the cooktop with U-u?
Yes. U-u is not a danger, and nothing is heating when it shows. Swap in an induction pan, center it and select the zone again. If a known good pan keeps being refused, stop trying other zones in a hurry and have the detection checked. A cooktop that heats nothing is safe to leave alone.
What you can safely check
- Switch the zone off and let the glass cool before you move any pan.
- Hold a magnet to the base of the pan, since an induction pan holds it firmly.
- Center the pan on the selected zone, choosing one wide enough for it.
- Choose the zone a second time while the 30 seconds are still running.
- Swap in another pan to rule out the first one. If U-u still appears with a known good pan, call us.
What our technician does for U-u
- Test the zone's pan detection with a known good induction pan
- Check the induction coil under the zone
- Explain the result and quote any repair in writing before replacing a part
How to keep U-u from coming back
- Test new pots with a magnet before you cook, so a non-induction pan does not surprise you.
- Choose a pan base wide enough for the zone, and set it down centered before selecting.
Technical reference
- Code
- U-u
- Appliance
- Whirlpool cooktop
- Control family
- Whirlpool induction cooktops
- Maker documentation
- Whirlpool owner manuals and support
- Checked
- November 2026
Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.
Related Whirlpool cooktop error codes
U-u questions
Why does my induction cooktop display U-u?
The cooktop found no suitable pan on the zone. Perhaps the pot is not made for induction, is off center or is the wrong size. The zone shuts itself off after 30 seconds without a pan.
My pan is stainless steel, so why does U-u show?
Stainless steel varies, and some of it is not magnetic. Test the base with a magnet, because a pan that a magnet will not grip firmly cannot be used on induction.
Could the zone itself be behind U-u?
Yes. If a good pan of the right size, centered on the zone, keeps producing U-u, its pan detection may need testing. A technician checks it and quotes a written price.
Will U-u clear by itself?
It clears when a suitable pan is detected, or when the zone shuts off after 30 seconds without one. You do not need to reset anything; just place a good induction pan and select the zone again.
Is U-u the same as the flashing U on the display?
They are related, since both tell you about the pan. U-u says no suitable pan was found at selection, while a flashing U beside the power level says the pan is the wrong type, wrong size or off center.
Something else going on with your cooktop?
We trace the cause in your home first and write the price down before any part is swapped.