Whirlpool Portable Dishwasher Start/Resume Light Blinking: Interrupted Cycle
On an older Whirlpool portable dishwasher, a flashing Start/Resume light says the cycle, or its start-up, got interrupted. An opened door, a power dip or a slow door close are common reasons.
What does Whirlpool dishwasher code Start/Resume mean?
Some older Whirlpool portable dishwashers flash the Start/Resume light when a cycle, or its start-up, gets interrupted. Opening the door mid-cycle, losing power, or failing to close the door within 3 seconds of pressing Start/Resume will do it. You might also hear a tone. This older style remains common in many homes.
Start/Resume at a glance
- Code
- Start/Resume
- Appliance
- Whirlpool dishwasher
- Applies to
- Older Whirlpool portable dishwashers with a Start/Resume light
- Type
- Normal status, not a failure
- Can you clear it yourself?
- Yes, it is a normal message or setting
- Most likely cause
- The door opened during the cycle
What you may notice with Start/Resume
- The Start/Resume light flashes instead of staying steady
- A tone may sound along with the flashing
- The cycle stops or will not begin
- The door was opened or power dipped just before
How the dishwasher detects Start/Resume
A portable dishwasher expects a clean sequence: you press Start/Resume, and the door closes within 3 seconds so the control can confirm it is shut. Once the cycle is running, the door should stay closed and power should stay on. The Start/Resume light flashes when that sequence is broken.
Three interruptions are named for it: the door opened during the cycle, the power was interrupted, or the door was not closed in time after Start/Resume. Some models also sound an audible tone. Each of them looks the same on the panel, so the first step is simply to repeat the start with a prompt door close. If the door closes in time and the flashing continues, the latch or door switch could be failing to sense the door. Power interruptions at home that keep happening can pass for a dishwasher problem too.
Why Start/Resume appears
- The door opened during the cycle
- A brief interruption of power
- Pressing Start/Resume and then closing the door after 3 seconds have passed
- A latch or door switch that is not registering
Can you keep using the dishwasher with Start/Resume?
Yes, once the cycle runs through without interruption. Press Start/Resume and shut the door promptly, then leave it closed. If the light flashes again, reset the power and try once more. If the door is closed in time and the light still flashes, stop and have us test the latch and door switch, since the dishwasher is not sensing the door.
What you can safely check
- Stop the cycle and unplug the dishwasher before you handle the door latch area.
- Plug it back in, press Start/Resume and push the door firmly shut within 3 seconds.
- If the light still flashes, reset the control by cutting power for 30 seconds: unplug the dishwasher, or turn off the breaker for a hard-wired unit.
- Start the cycle again and shut the door promptly.
What our technician does for Start/Resume
- Test the door latch circuit.
- Check that the door switch registers when the door closes.
- Look at whether power interruptions in the home are being mistaken for a dishwasher problem.
How to keep Start/Resume from coming back
- Close the door within 3 seconds of pressing Start/Resume, and leave it closed until the cycle ends.
- During Florida storm season, power dips can interrupt a cycle, so recheck the panel after any flicker.
Technical reference
- Code
- Start/Resume
- Appliance
- Whirlpool dishwasher
- Control family
- Older Whirlpool portable dishwashers with a Start/Resume light
- Maker documentation
- Whirlpool owner manuals and support
- Checked
- November 2026
Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.
Related Whirlpool dishwasher error codes
Start/Resume questions
Does an audible tone with the flashing light mean something extra?
Some models also sound a tone alongside the flashing light. It points to the same cause: an interruption to the cycle or to its start-up.
What should I do if the power dropped during a cycle?
Press Start/Resume, then shut the door promptly, within 3 seconds. A cycle that still will not pick up calls for a 30-second power cut to reset the control, after which you start the cycle fresh.
Could repeated flashing mean the latch is worn?
It can. When the door closes in time and the light keeps flashing, the door latch or its switch might not be detecting the door, and that needs testing. Repeated power dips in the home can also mimic it.
Can a power flicker make Start/Resume flash?
Yes. A brief power interruption is one of the named reasons, so after a flicker the light may flash even though the dishwasher is fine. Restart the cycle and shut the door within 3 seconds.
What should I mention about the door?
Tell us whether the light flashes even when the door is shut within 3 seconds, and whether power flickered. That separates a latch problem from an interrupted cycle.
Something else going on with your dishwasher?
We trace the cause in your home first and write the price down before any part is swapped.