(813) 565-3059 Book a Repair
Whirlpool wall oven error code

Whirlpool Double Oven Display 1c4c: A Control Problem Was Logged

1c4c on a Whirlpool wall oven means the oven recorded trouble in its control or in the wiring nearby, and no narrower detail is given for the code.

Stop using it until checkedChecked November 2026

What does Whirlpool wall oven code 1c4c mean?

A Whirlpool wall oven showing 1c4c, a WOD51EC0HS double oven for example, has recorded a problem with its control or the wiring connected to it. No more detail comes with the code. Owners may find the display stuck on 1c4c, the clock gone, or a running cycle ended early. Testing starts at the control and follows the harness outward.

1c4c at a glance

Code
1c4c
Appliance
Whirlpool wall oven
Applies to
Whirlpool wall ovens with an oven control, like the WOD51EC0HS
Type
Stop using it until checked
Can you clear it yourself?
No, stop using it until it is checked
Most likely cause
Logic inside the oven control

What you may notice with 1c4c

  • The display holds 1c4c and will not move on.
  • The clock may vanish from the display.
  • A cycle in progress may end early.
  • The oven may fail to start a new cycle.

How the wall oven detects 1c4c

A wall oven control checks its circuits continuously. The control logic, the plugs that serve it, and the supply feeding it all have to stay healthy for a cycle to run. If something looks wrong, the control writes the problem down and posts a code.

For 1c4c, the record says only that the control or its wiring has an issue. Nothing narrower is published, so the cause could be the logic on the board, a connector that has loosened or scorched, or a supply that cuts in and out. A reset shows that the display can be cleared, not why the code appeared. Testing begins at the control and works outward along the harness.

Likely causes of 1c4c

  • Logic inside the oven control
  • Loose or damaged plugs in the wiring harness
  • Supply to the control that cuts in and out

Can you keep using the wall oven with 1c4c?

If 1c4c does not return after a reset and the oven runs normally, you can keep using it and watch the display. If it comes back, stop using the oven, since the cause is a control or wiring problem that a reset cannot fix. Cut the breaker if a burning smell appears.

What you can safely check

  1. Switch the oven's breaker off, let the cavity cool, and leave the power off for a full minute.
  2. Switch the breaker on once more.
  3. Stay within sight of the oven for a minute and note whether 1c4c shows again.
  4. With a clear screen, run a brief cycle and see that everything responds. Should it return, stop using the oven and phone us.

What our technician does for 1c4c

  • Test how the control responds
  • Check harness connectors for heat marks
  • Quote the work in writing, since built-in ovens sit tight in cabinetry

How to keep 1c4c from coming back

  • Wipe grease and steam film off the panel before it works behind the display.
  • Leave clearance around the built-in oven so the cabinet does not trap heat.
  • Avoid repeated breaker resets as a way to keep cooking.

Technical reference

Code
1c4c
Appliance
Whirlpool wall oven
Control family
Whirlpool wall ovens with an oven control, like the WOD51EC0HS
Checked
November 2026

Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.

FAQ

1c4c questions

Why would 1c4c show up while the oven is cooking?

The board monitors its circuits constantly, so trouble in the control or its wiring can be flagged midway through a cycle. We look for the trigger.

Does a built-in oven need to be unplugged?

Built-in ovens are generally hard-wired, which is why the breaker is the tool. Leave the oven closed and the wiring untouched, and let a technician inspect it.

What does it mean if 1c4c keeps returning?

Repeated returns indicate a condition in the control or wiring that resetting will not cure. Keep the oven off until it has been tested, before another cycle.

Does 1c4c mean the control must be replaced?

Not necessarily. Loose connectors and heat marks on the harness can produce the same code, which is why the wiring is inspected before a board is suggested.

What happens if 1c4c is ignored?

The oven may keep ending cycles early, and a loose connector near the control can worsen over time. A returning code is worth testing sooner.

Need help with 1c4c?

We trace the cause in your home first and write the price down before any part is swapped.

Call Book a Repair
Call (813) 565-3059 Book a Repair