Whirlpool Oven Code 1c6c on Single and Double Models: Control Trouble
1c6c on a Whirlpool wall oven means the control or its wiring is reporting a problem; a double oven may show it when just one cavity was running.
What does Whirlpool wall oven code 1c6c mean?
Whirlpool wall ovens in single, double and microwave-combo forms display 1c6c when something is wrong with the oven control or its wires. A double oven has one shared display, so the code may appear although only a single cavity was cooking. The published guidance names no one part, so a hands-on check settles it.
1c6c at a glance
- Code
- 1c6c
- Appliance
- Whirlpool wall oven
- Applies to
- Whirlpool single, double and microwave-combo wall ovens
- Type
- Stop using it until checked
- Can you clear it yourself?
- No, stop using it until it is checked
- Most likely cause
- Main oven control
What you may notice with 1c6c
- 1c6c is shown on the display of the wall oven.
- On a double oven the code may show though only one cavity was in use.
- Heating may fail or a running cycle may stop.
- A reset may clear it for a short time.
How the wall oven detects 1c6c
A wall oven runs on one control that reads the sensors, switches the elements and talks to the display. On a double oven that control and display are shared, which is why a message can appear even when only one cavity was cooking.
When the control detects trouble in itself, or in the plugs and wires that serve it, it posts 1c6c. The published guidance names no single part, so the cause could be the control, a worn connector, or power that arrives in poor condition. A reset can clear a one-time disturbance, whereas a condition that persists brings the code back. For that reason connector wear is checked before a control replacement is considered.
Likely causes of 1c6c
- Main oven control
- Plugs and connectors at the control
- Quality of the power arriving at the oven
Can you keep using the wall oven with 1c6c?
After a reset that clears 1c6c and restores normal heating, cooking can continue, with each cavity of a double oven tried on its own. If the code comes back, stop using the oven until it has been tested. Switch the breaker off if you smell burning or hear clicking from the control area.
What you can safely check
- Turn the breaker or breakers serving the wall oven off and wait for the cavity to cool.
- After a full minute off, restore power.
- Linger near the oven for a minute and make sure 1c6c stays away.
- Bake briefly to see that the oven heats as it should. If the code returns, phone us.
What our technician does for 1c6c
- Test both cavities of a double oven instead of assuming one
- Examine the connectors for wear prior to any control replacement
- Say so plainly if the code clears and stays away, with no part to sell
How to keep 1c6c from coming back
- Keep splatter and steam off the shared control panel of a double oven.
- Do not trip the breaker repeatedly to force a restart.
- Use surge protection if storms in your area cause power flickers.
Technical reference
- Code
- 1c6c
- Appliance
- Whirlpool wall oven
- Control family
- Whirlpool single, double and microwave-combo wall ovens
- Maker documentation
- Whirlpool owner manuals and support
- Checked
- November 2026
Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.
Related Whirlpool wall oven error codes
1c6c questions
Will 1c6c touch both cavities of a double oven?
It can, because the control serves the whole unit. After a reset, try each cavity on its own. If one misbehaves, we test that side's connections first.
Might a power surge have caused 1c6c?
Voltage surges can disturb a control, and that is what the reset steps address. The code cannot prove one happened, so we watch how the control behaves after the reset.
When should I get it looked at?
Pay attention if 1c6c returns straight after power is restored or any time later that week; the repeat shows that the control or wiring should be tested properly.
Will 1c6c clear by itself?
A reset may clear it if it came from a one-time disturbance. If the code returns, the control or its wiring still holds a condition worth testing.
What should I mention about 1c6c when describing it?
Say whether it is a single or double oven, which cavity was running, and when the code appeared. A note about recent storms or power flickers helps too.
Need help with 1c6c?
We trace the cause in your home first and write the price down before any part is swapped.