Whirlpool Range 1D22: Oven Sensor Circuit Review
1D22 shows on a Whirlpool range when the control questions the circuit of the oven temperature sensor. The sensor, the control, and the wiring between them are all under suspicion.
What does Whirlpool range code 1d22 mean?
1D22 is shown on Whirlpool ranges of the freestanding or slide-in style, electric or gas, the WFG515S0ES among them, once the control starts doubting the sensor circuit in the oven. That circuit includes the sensor, the control and the wires that connect them. The oven may heat unevenly or stop partway, with the code lingering until power is reset.
1d22 at a glance
- Code
- 1d22
- Appliance
- Whirlpool range
- Applies to
- Whirlpool electric and gas ranges, freestanding or slide-in
- Type
- Needs attention soon
- Can you clear it yourself?
- Sometimes, after the safe checks below
- Most likely cause
- A sensor in the oven cavity feeding the circuit
What you may notice with 1d22
- 1D22 holds on the display after a cycle
- The oven seems to heat unevenly
- A bake stops before the timer ends
- The code returns after you reset power
How the range detects 1d22
The sensor circuit is the whole path that carries the temperature signal: the probe in the oven, the plug on its lead, the wiring behind the range, and the input on the control. The control applies a small signal to this path and reads what comes back. A healthy circuit returns a clean, steady value that moves with the oven heat.
If any link is damaged, loose or drifting, the value changes in a way the control does not expect. Since the control only sees the end result, it cannot say which link is responsible. It marks the circuit as questionable and shows 1D22, and it may stop heating until power is cycled. That broad view is the reason a technician tests the circuit from end to end.
Likely causes of 1d22
- A sensor in the oven cavity feeding the circuit
- The control board reading the sensor circuit
- Connectors in the sensor wiring with a poor contact
Can you keep using the range with 1d22?
Leave the oven alone if 1D22 keeps coming back. A reading you cannot trust can mean uneven cooking or a cycle that stops without warning. After a first reset, a short test bake is fine so long as the code stays gone. A returning code means it is time to stop and have the circuit checked.
What you can safely check
- Cancel cooking, shut off the breaker for the range, and allow the oven to cool before doing anything else.
- Wait a full minute, restore power, and give the display a minute to settle.
- Look for 1D22 and run a short bake to see whether the oven warms normally.
- Should 1D22 return, stop baking and call us.
What our technician does for 1d22
- Test the whole sensor circuit end to end, probe to the connection at the control
- Look for loose or poor-contact connectors
- Replace the part that testing singles out and nothing else
How to keep 1d22 from coming back
- Do not tug on the oven sensor or its lead while cleaning, because the signal is small and easily disturbed.
- Keep the area behind the range free of anything that pulls on the power and signal wiring when you slide the range out.
Technical reference
- Code
- 1d22
- Appliance
- Whirlpool range
- Control family
- Whirlpool electric and gas ranges, freestanding or slide-in
- Maker documentation
- Whirlpool owner manuals and support
- Checked
- November 2026
Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.
Related Whirlpool range error codes
1d22 questions
Is the oven overheating when 1D22 shows?
The code says nothing of the kind. It reports doubt about the sensor circuit's reading, so we examine that circuit before drawing any conclusion about the real temperature inside the oven.
Why would a loose connector confuse the control?
The sensor's signal is tiny, and a poor contact distorts it. A connector that has worked loose can pass for a failed sensor, so we look at connections first.
Does an older range justify a sensor repair?
In many cases the repair costs much less than replacing the range. We say plainly when the numbers do not support fixing it, before any part is ordered.
Could 1D22 be a surge problem?
A power surge can upset a control and leave a code behind. If 1D22 appeared after a storm and a reset cleared it, it may not return. If it does come back, the circuit needs testing.
How is 1D22 different from 3D22?
Both come from the same sensing group and share their suspects. The numbers are separate reports, so we note which one your range showed and use that when planning the first tests.
Need help with 1d22?
We trace the cause in your home first and write the price down before any part is swapped.