(813) 565-3059 Book a Repair
Whirlpool range error code

Whirlpool Range ERR Message: Setting the Controls Incorrectly

ERR on a Whirlpool range means the control rejected an entry, such as a temperature or time outside the allowed range. Cancel and enter a valid setting.

Normal status, not a failureChecked November 2026

What does Whirlpool range code ERR mean?

Whirlpool documents ERR on ranges as an invalid entry at the controls. You may have entered a temperature or time outside the allowed range, or chosen an option combination the oven does not support. It is the control saying that the instruction does not make sense, not a report of a failing part. Re-entering a valid setting normally clears it. If ERR appears even for a straightforward setting such as Bake at 350, the keypad is the more likely cause.

ERR at a glance

Code
ERR
Appliance
Whirlpool range
Applies to
Whirlpool ranges with electronic oven controls
Type
Normal status, not a failure
Can you clear it yourself?
Yes, it is a normal message or setting
Most likely cause
Temperature or time entered outside the permitted range

What you may notice with ERR

  • ERR appears right after you enter a setting
  • The oven does not start the cycle you chose
  • The same setting works after Cancel and a careful re-entry
  • A key seems to stick or the panel feels damp

How the range detects ERR

When you set the oven, the control checks each entry against what the oven can actually do. A bake temperature has an allowed range, a timer has limits, and certain cycles cannot run together with certain options. If any entry falls outside those limits, the control cannot carry it out.

ERR is the message it shows in that case. It is a response to your input rather than a reading from a sensor, so nothing in the oven has to be failing for it to appear. Cancelling and re-entering a valid setting fixes it. If the message appears for a plain entry such as Bake at 350, the control may be receiving extra or stuck key presses, which points to the keypad instead of your settings.

Why ERR appears

  • Temperature or time entered outside the permitted range
  • An incompatible cycle and option combination
  • A stuck key registering an extra digit

Can you keep using the range with ERR?

Yes. ERR is a rejection of an entry, not a safety warning, so the range can keep being used. Press Cancel or Off, then set a temperature and time within the oven's limits. If ERR repeats for ordinary settings like Bake at 350, stop using the keypad for cooking, clean and dry it, reset at the breaker, and have it tested if the message stays.

What you can safely check

  1. Press Cancel or Off to stop what you were setting; the oven should be cool or idle before you continue.
  2. Re-enter the setting carefully, within the oven's published limits.
  3. Avoid combining cycles and options that exclude each other.
  4. If ERR shows even for Bake at 350, clean and dry the panel, then switch off at the breaker for five minutes and restore power. If it persists, call us.

What our technician does for ERR

  • Test the keypad for a stuck key or extra digit
  • Check the panel for moisture or residue
  • Check the connection between panel and control
  • Confirm normal entries are accepted after the test

How to keep ERR from coming back

  • Check your owner's manual for the temperature and time limits.
  • Avoid combining cycles and options the oven does not support.
  • Keep the panel clean and dry so no key sticks.

Technical reference

Code
ERR
Appliance
Whirlpool range
Control family
Whirlpool ranges with electronic oven controls
Checked
November 2026

Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.

FAQ

ERR questions

Does ERR mean the range is broken?

Not usually in the sense of a failing part. It means the control did not accept what you entered. Cancel, then enter a valid temperature, time or option combination.

Why does ERR appear when I set a normal temperature?

A key may be sticking and adding an extra digit, or the panel may be damp. Clean and dry it, reset at the breaker, and try again. If it persists, treat it as a keypad problem.

Are some cycle combinations not allowed?

Yes. Some cycles and options are mutually exclusive, and the oven will reject them. Check your owner's manual for the combinations your range supports.

Will ERR clear by itself?

It clears when you press Cancel or Off and enter a valid setting. If you leave it alone, the control keeps showing it, because it is waiting for a corrected entry from you.

What should I tell you if ERR keeps appearing?

Tell us what setting you entered, such as Bake at 350, whether a key seems to stick, and whether the panel was cleaned recently. That tells us if the keypad needs a test.

Something else going on with your range?

We trace the cause in your home first and write the price down before any part is swapped.

Call Book a Repair
Call (813) 565-3059 Book a Repair