(813) 565-3059 Book a Repair
Whirlpool range error code

Whirlpool Range Code F1-2: Oven Temperature Sensor Circuit

F1-2 is a display code on some older Whirlpool ranges. It points to the oven's temperature sensor, the oven control, or the wiring between them, and the only published step is a power reset.

Needs attention soonChecked November 2026

What does Whirlpool range code F1-2 mean?

Whirlpool's WFG515S0ES family is one example of the older freestanding and slide-in ranges that flash F1-2 when the oven hits a problem it wants cleared. Whirlpool's published step is to cycle the power. Three areas get named: the sensor that reads oven temperature, the oven control, and the wires connecting the two. The code stays on the display, and the oven may fail to heat or may not hold its temperature. Ranges of this age have cooked in many Tampa Bay kitchens for years, and we still repair them.

F1-2 at a glance

Code
F1-2
Appliance
Whirlpool range
Applies to
Older Whirlpool ranges (WFG515S0ES family)
Type
Needs attention soon
Can you clear it yourself?
Sometimes, after the safe checks below
Most likely cause
Oven temperature sensor that has aged and reads wrongly

What you may notice with F1-2

  • F1-2 stays visible on the range display after power returns
  • The oven does not heat, or heats weakly
  • Baking results change because temperature is not held steadily
  • The code may clear after a reset and then return

How the range detects F1-2

An oven holds its temperature by reading a sensor inside the cavity and switching the heat on and off to match the setting. The control board converts the sensor's electrical signal into a temperature. If that signal is missing or does not look believable, the board cannot tell how hot the oven really is.

On these older Whirlpool ranges, the F1-2 message appears when the control decides the temperature circuit has a problem it cannot sort out alone. Because the sensor, the wires that carry its signal, and the control all sit in one chain, any of the three can trip the same code. Whirlpool's published guidance therefore asks for a power cycle first and lists all three areas.

Likely causes of F1-2

  • Oven temperature sensor that has aged and reads wrongly
  • Loose or damaged connector or wire at the sensor
  • Oven control board that misreads the sensor signal

Can you keep using the range with F1-2?

With F1-2 showing, treat the oven as unreliable. A control that cannot read temperature may overheat food or fail to cook it, so we suggest leaving the oven off after one reset attempt. Cooktop burners are separate from the oven sensor circuit, but if the display or controls act strangely, switch the range off at the breaker.

What you can safely check

  1. Turn the oven off and give the cavity plenty of time to cool before anything else.
  2. Kill the range's breaker for sixty seconds, then restore it.
  3. Stay near the display for a while and see if F1-2 reappears.
  4. If it stays clear, bake something ordinary and notice whether the oven reaches normal heat.
  5. Should F1-2 return, leave the oven unused and phone us.

What our technician does for F1-2

  • Measure the oven sensor circuit with a meter
  • Inspect the sensor wiring and connectors for wear or heat damage
  • Test the oven control only after the sensor and wiring check out
  • Tell you whether repairing this age of range still makes sense

How to keep F1-2 from coming back

  • Keep spills and grease off the oven walls near the sensor probe, cleaning only when the cavity is cool
  • Avoid hitting the sensor probe while loading racks or cleaning
  • Have the oven looked at when it starts heating unevenly, before the code appears

Technical reference

Code
F1-2
Appliance
Whirlpool range
Control family
Older Whirlpool ranges (WFG515S0ES family)
Checked
November 2026

Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.

FAQ

F1-2 questions

Why do these old codes carry a hyphen?

Earlier Whirlpool displays split the code into two parts. The second part carries more detail for service people, yet the owner guidance gives a single reset for the entire family.

Does F1-2 prove the sensor has failed?

No. It says the circuit containing the sensor needs checking, and wiring or the control can raise the same code. We test the circuit first and name a part afterward.

At what age does a range stop being worth repairing?

No fixed age applies. We weigh parts availability against cost, then tell you plainly whether a repair or a new range serves you better.

Will F1-2 clear by itself?

A power reset can clear a one-time glitch, and the code may stay away afterward. If it returns, the cause is still present, so another reset only delays the testing a technician has to do.

What should I tell you on the phone?

Give us the exact code, your range model if you can find it, and whether the oven heats at all. Mention if F1-2 returned after the breaker reset and when you first saw it.

Need help with F1-2?

We trace the cause in your home first and write the price down before any part is swapped.

Call Book a Repair
Call (813) 565-3059 Book a Repair