(813) 565-3059 Book a Repair
Whirlpool range error code

Whirlpool Range Display Lo or Pre: Normal Warm-Up Message

Lo and Pre are ordinary display words on a Whirlpool range, not errors: Lo shows while the oven is under 170 degrees F, and Pre shows while it preheats.

Normal status, not a failureChecked November 2026

What does Whirlpool range code Lo or Pre mean?

Nothing is wrong when a Whirlpool range, freestanding or slide-in, for example the WFE515S0ES or WFG525S0HV, shows Lo or Pre; both are normal readings. Right after you start the oven, Lo tells you the cavity has not yet reached 170 degrees F, while Pre tells you it is still in its preheat stage. On some models the display switches to the true temperature once the oven passes 170 degrees and then climbs in steps of 5 degrees. A tone sounds when the set temperature arrives.

Lo or Pre at a glance

Code
Lo or Pre
Appliance
Whirlpool range
Applies to
Whirlpool ranges with an oven temperature display
Type
Normal status, not a failure
Can you clear it yourself?
Yes, it is a normal message or setting
Most likely cause
Oven still warming toward its set temperature

What you may notice with Lo or Pre

  • Lo or Pre shows on the display after you start the oven
  • The display changes to a temperature as the oven warms
  • A tone sounds when the set temperature is reached
  • The oven slowly gets hotter with the door closed

How the range detects Lo or Pre

When you start the oven, the display does not show an exact temperature straight away. The control reads the oven's temperature sensor, and while the cavity is still below 170 degrees F the display shows Lo, or Pre while the oven is preheating. Once the oven passes 170 degrees, some models switch to the real temperature and count upward in steps of 5 degrees.

A tone sounds when the oven reaches the temperature you set, which is your signal that preheating is finished. All of this is the control doing what it was designed to do, so neither word is an error code. The one situation worth attention is an oven that stays on Lo or Pre for much longer than a preheat should take, with the cavity never getting hot. That would point to the heat circuit or the temperature sensing rather than to a display message.

Why Lo or Pre appears

  • Oven still warming toward its set temperature
  • Cavity below the lowest temperature the display can show
  • Ordinary behavior, not a failing part

Can you keep using the range with Lo or Pre?

Yes, this is normal and the oven is working. Let it finish preheating with the door closed, and put food in once the tone sounds. Should the oven stay cold while the display never leaves those words, switch it off and have the heating checked. On a gas model, a gas smell calls for stepping outside and phoning the utility.

What you can safely check

  1. Keep the door closed and your hands clear of the hot cavity, and switch the oven off if anything seems wrong.
  2. Give the oven time to heat with the door closed.
  3. Wait for the display to swap Lo or Pre for a number.
  4. Listen for the tone that tells you the set temperature has been reached.
  5. Your owner's manual explains any different wording your model may show.
  6. Reach out only when no number ever shows up or the cavity stays cold.

What our technician does for Lo or Pre

  • Test the oven's heat circuit if the display lingers on Lo or Pre much longer than a preheat should take
  • Check temperature sensing when the oven climbs slowly
  • Quote any repair in writing and ask you to open nothing

How to keep Lo or Pre from coming back

  • Keep the door closed during preheating so the oven reaches temperature steadily.
  • Check your owner's manual if a display word is unfamiliar before assuming a problem.
  • Mention a slow warm-up early if it seems longer than it used to.

Technical reference

Code
Lo or Pre
Appliance
Whirlpool range
Control family
Whirlpool ranges with an oven temperature display
Checked
November 2026

Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.

FAQ

Lo or Pre questions

Does Lo on the display mean an error?

No. Lo appears while the oven sits under 170 degrees F, and Pre appears during preheating. A real temperature takes over as the oven climbs.

How long before I should worry about the display?

Allow a normal preheat, long enough for the display to move on to actual temperatures. Should the oven stay cold while the display never leaves those words, the heating circuit needs a look.

Are older ovens stuck on Lo repaired?

Yes. Ovens that have long outlived their warranty come in regularly, and you hear plainly if a repair would not be worthwhile.

Why does the display skip from Lo to a temperature?

The oven is below 170 degrees F while it shows Lo, then the display moves to the real temperature once it passes that point. On some models the reading climbs in steps of 5 degrees.

Does Pre mean something is wrong?

No. Pre means the oven is preheating, so it is working normally. The tone that sounds at the set temperature tells you when to put food in.

Something else going on with your range?

We trace the cause in your home first and write the price down before any part is swapped.

Call Book a Repair
Call (813) 565-3059 Book a Repair