Whirlpool Bottom-Freezer Refrigerator F4 EE: Checking a Flashing F
F4 EE shows on the WRB322DMBM and other Whirlpool bottom-freezers, in the same family as other blinking-F codes. Power-cycle it, and arrange service if it persists, as EE is undefined.
What does Whirlpool refrigerator code F4 EE mean?
A Whirlpool bottom-freezer, the WRB322DMBM or WRB329DFBM among them, can blink F4 EE on its display. It belongs to the same blinking-F group as the other F codes and comes with identical brief guidance: cycle the power, and arrange service if the trouble remains. EE has no definition and no part. The practical result is a blinking letter on the panel; since cooling may go on, the interior temperature deserves a check.
F4 EE at a glance
- Code
- F4 EE
- Appliance
- Whirlpool refrigerator
- Applies to
- Whirlpool bottom-freezer refrigerators (WRB322DMBM, WRB329DFBM)
- Type
- Needs attention soon
- Can you clear it yourself?
- Sometimes, after the safe checks below
- Most likely cause
- The condition behind F4 EE, as the control sees it
What you may notice with F4 EE
- A blinking F with EE shows on the panel
- The refrigerator is probably still cooling
- The letter keeps flashing after you close the doors
- The code leaves for a while after a power reset
How the refrigerator detects F4 EE
Not every code on a refrigerator tells you what is broken. F4 EE belongs to a group where the control raises a flashing letter and leaves the rest unsaid. The F gets your attention, the pair identifies the entry in the control's own list, and the manufacturer publishes no meaning for EE.
What the control does know is that one of the circuits it monitors returned something outside its normal range. A restart gives it a fresh chance to read that circuit. Brief events, such as a short interruption of power, vanish at that point. A line that still reports the same reading will bring the flash back. That is the moment when the connectors on the circuit, the wiring run and the control itself are tested, because the display alone cannot say which of them is responsible.
Likely causes of F4 EE
- The condition behind F4 EE, as the control sees it
- A worn or loose connector along that line
- Cooling turned off at the panel
- One stray control reading
Can you keep using the refrigerator with F4 EE?
While the interior stays cold, you can continue to use it, but check the temperature instead of assuming. A refrigerator thermometer in each compartment settles the question after a reset. When F4 EE returns or anything feels warm, put perishables in a cooler. The code reports no direct danger, but a persistent flashing letter means the control sees something it cannot explain, and that deserves a test.
What you can safely check
- Switch the breaker off, or pull out the plug, and let a minute go by.
- Restore power.
- Check the panel to confirm cooling is on.
- Watch the display for a minute for any return of F4 EE.
- Don't open the doors while you wait.
- If the blinking comes back, call us.
What our technician does for F4 EE
- Read the control, then inspect the circuit's connections
- Test that circuit for a steady reading
- Give a written price before starting repairs
How to keep F4 EE from coming back
- Check the cooling setting after any power interruption or panel cleaning.
- Keep the refrigerator on a surge-protected outlet to limit the dips that can leave a control confused.
Technical reference
- Code
- F4 EE
- Appliance
- Whirlpool refrigerator
- Control family
- Whirlpool bottom-freezer refrigerators (WRB322DMBM, WRB329DFBM)
- Maker documentation
- Whirlpool owner manuals and support
- Checked
- November 2026
Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.
Related Whirlpool refrigerator error codes
F4 EE questions
Does F4 EE rank among the serious codes?
Whirlpool's guidance gives it no ranking. What it asks for is a power cycle, and service if the blinking continues. How serious the cause is can only be judged after the control has been read.
How many power cycles should I try?
A single attempt, followed by a minute of watching, is all the guidance describes. Doing it repeatedly will not uncover the cause, so if the blinking returns, arrange a visit.
What do I receive after the diagnosis?
An explanation in plain terms of what the control reported, a price in writing for any repair, and our 30-day workmanship warranty on the work. Should a repair not be worthwhile, you will hear that from us.
Does F4 EE mean the same thing as the other blinking F codes?
The owner steps are the same for all of them and no part is named. The pair may point to different circuits, which only reading the control on your refrigerator can show.
What happens if I ignore F4 EE?
The refrigerator may carry on cooling for a long time, or it may not. Because the code names no cause, ignoring it leaves you guessing about food temperatures, which is why a returning blink needs testing.
Need help with F4 EE?
We trace the cause in your home first and write the price down before any part is swapped.