(813) 565-3059 Book a Repair
Whirlpool refrigerator error code

Whirlpool French-Door F8 EC: Diagnosing the Flashing Display

F8 EC is a flashing-F display on older Whirlpool French-door bottom-freezers such as the WRF560SEHZ. The brand's routine is a power cycle with cooling on and a minute of watching, then service if it stays.

Needs attention soonChecked November 2026

What does Whirlpool refrigerator code F8 EC mean?

A flashing F followed by EC can appear on older Whirlpool French-door bottom-freezers, among them the WRF560SEHZ and WRX735SDHZ. Whirlpool keeps its steps short: power-cycle, leave the cooling function on, watch the display for a minute, and get service when the code lingers. EC is not explained as one part. Homes have run these models for years, and repairing them is still part of our work. On the panel you see only the blinking code.

F8 EC at a glance

Code
F8 EC
Appliance
Whirlpool refrigerator
Applies to
Older Whirlpool French-door bottom-freezers (WRF560SEHZ, WRX735SDHZ)
Type
Needs attention soon
Can you clear it yourself?
Sometimes, after the safe checks below
Most likely cause
Control logic noting a circuit it could not confirm

What you may notice with F8 EC

  • A flashing F with EC shows on the panel
  • The freezer drawer still feels cold, at least for a while
  • Powering down for a minute clears the display
  • The flash returns later, sometimes the same day

How the refrigerator detects F8 EC

Cooling in a French-door refrigerator depends on several parts working in sequence: temperature sensors, a fan that moves cold air, and a defrost circuit that clears frost from the evaporator. The control board watches all of them.

When the board cannot confirm one of those circuits, it shows the flashing F with a pair of characters. For F8 EC, Whirlpool does not say which circuit EC stands for, so the display points to a problem area without naming it. The suggested routine gives the board a fresh start: power off for a minute, power on, cooling confirmed, a minute of observation. If the code does not come back, the board probably saw a passing event. If it does, one of the monitored circuits keeps failing its check, and the sensors, fan and defrost wiring are what get tested.

Likely causes of F8 EC

  • Control logic noting a circuit it could not confirm
  • Wiring or a plug on a defrost, fan or sensor circuit
  • Cooling switched off from the panel
  • An outage or surge that unsettled the board

Can you keep using the refrigerator with F8 EC?

You can continue using the refrigerator while you watch it, because the code by itself does not say cooling has stopped. Keep a thermometer in each section and check it after the reset. If food stays cold, carry on. If the freezer contents start to soften or the refrigerator side warms, move perishables to a cooler. A problem in the defrost or fan circuits can show up gradually, so a calm display is no substitute for checking temperatures.

What you can safely check

  1. Make sure nothing needs the refrigerator right now, then switch off its breaker, or pull the plug, and wait a minute.
  2. Turn the power back on.
  3. Find the cooling setting on the panel and confirm it reads on.
  4. Remain at the panel for a minute and see whether the flash comes back.
  5. If it does, press a fingertip against frozen items to see whether they are still hard.
  6. Soft freezer food together with the code means we should hear from you.

What our technician does for F8 EC

  • Test the sensors, fan and defrost circuits
  • Inspect connectors for a poor contact
  • Give a written price before any work

How to keep F8 EC from coming back

  • Do not let frost or ice build up around the vents; keep air paths inside the freezer clear.
  • Glance at the display after storms or power flickers, since an older board can latch a code afterward.

Technical reference

Code
F8 EC
Appliance
Whirlpool refrigerator
Control family
Older Whirlpool French-door bottom-freezers (WRF560SEHZ, WRX735SDHZ)
Checked
November 2026

Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.

Models

Whirlpool models that can show F8 EC

Models named for this code in Whirlpool documentation that have a page here. Check the full model number on the rating label before you act on a code.

FAQ

F8 EC questions

What is the meaning of F8 EC on my Whirlpool refrigerator?

It is a blinking F code, and the maker answers it with a power cycle followed, if it returns, by service. Whirlpool's guidance ties EC to no single named part, so the circuit is confirmed at your home.

How long do I watch after restoring power?

About a minute. If the code stays gone and both compartments hold their temperature, you can carry on. Should it return, arrange a visit.

Does it pay to repair an older French-door refrigerator?

It can, depending on the model and what testing shows. We test before anything else, put the price in writing, and are honest if replacing your refrigerator is the wiser choice.

Could F8 EC point to the defrost system?

It might, since a defrost circuit is one of the circuits the control monitors. The guidance names no part, though, so we test the sensors, fan and defrost wiring before saying which one is involved.

Will F8 EC go away if I leave the refrigerator alone?

Possibly, if it was a one-time event. If the flashing returns after a reset, the control is flagging the same circuit again and waiting will not remove the cause.

Need help with F8 EC?

We trace the cause in your home first and write the price down before any part is swapped.

Call Book a Repair
Call (813) 565-3059 Book a Repair