Whirlpool Refrigerator FCodes: What Any Flashing F Means
A flashing F with two characters after it, on Whirlpool French-door and side-by-side refrigerators, is what we call an FCode. Whirlpool's instruction: power-cycle, keep cooling on, and get service if the F returns.
What does Whirlpool refrigerator code FCodes mean?
We use FCodes for any display where a blinking F is followed by two characters. It covers Whirlpool French-door bottom-freezers (WRF535SMHZ, WRX735SDHZ) and side-by-side refrigerators with a door dispenser (WRS325SDHZ, WRS571CIHZ, WRS588FIHZ). Both styles get one instruction: cycle the power, keep cooling on, observe the display, and arrange service if the F returns. No part is named, so testing decides what stands behind each pair.
FCodes at a glance
- Code
- FCodes
- Appliance
- Whirlpool refrigerator
- Applies to
- Whirlpool French-door and side-by-side refrigerators
- Type
- Needs attention soon
- Can you clear it yourself?
- Sometimes, after the safe checks below
- Most likely cause
- A circuit the control could not verify, flagged by the F
What you may notice with FCodes
- A flashing F followed by two characters on the display
- The refrigerator may cool normally while it flashes
- The display clears after a power cycle
- The same code comes back at a later time
How the refrigerator detects FCodes
A flashing F is the control's general-purpose alert. Whatever the specific pair of characters that follows, the letter F says that the board has found a circuit it cannot verify. Because Whirlpool does not publish what each pair stands for, the owner instruction has to be the same for all of them.
The routine has three parts. Cutting power for a minute and restoring it makes the board restart every check. Confirming that cooling is on removes the simplest cause, a setting turned off by a stray touch. Watching the display for a minute shows whether the code returns. If it does, the characters after the F matter, because they tell a technician where to begin: sensor, fan or defrost circuits, or the wiring between them. That is why writing down every character you see is worth the effort.
Likely causes of FCodes
- A circuit the control could not verify, flagged by the F
- A connector working loose on a defrost, fan or sensor line
- Cooling turned off at the panel
- A power loss or surge that left the board stuck on the code
Can you keep using the refrigerator with FCodes?
Many of these refrigerators keep running with the code showing, but the code means the control has noticed a problem, so keep an eye on it. Put a thermometer in each compartment and read it after the reset. If food stays cold, you can carry on while watching for a repeat. If the code returns, or the freezer softens or the refrigerator side warms, shift perishables into a cooler and get the circuits tested.
What you can safely check
- Turn the refrigerator off at the breaker, or unplug it, for one minute.
- Restore power.
- At the panel, confirm that cooling is on.
- Give the display a minute and see whether the F blinks once more.
- If it does, record every character of the code, when it appeared and how each compartment feels.
- Read those notes to us when you phone.
What our technician does for FCodes
- Test the circuits behind the specific F pair
- Check sensor, fan and defrost wiring
- Quote in writing before any work
How to keep FCodes from coming back
- Write down the full code whenever it appears; the characters after the F tell us where to begin.
- Keep cooling switched on after outages and panel cleaning, and use a surge-protected outlet.
Technical reference
- Code
- FCodes
- Appliance
- Whirlpool refrigerator
- Control family
- Whirlpool French-door and side-by-side refrigerators
- Maker documentation
- Whirlpool owner manuals and support
- Checked
- November 2026
Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.
Whirlpool models that can show FCodes
Models named for this code in Whirlpool documentation that have a page here. Check the full model number on the rating label before you act on a code.
Related Whirlpool refrigerator error codes
FCodes questions
What is a blinking F telling me on a Whirlpool refrigerator?
That the control has flagged something. Whirlpool answers with a power cycle and cooling on, plus service if the F persists. Testing shows which circuit the characters after the F point to.
Do the steps change with the refrigerator style?
No. Side-by-sides with a dispenser and French-door models each get a minute without power, cooling confirmed, and a minute of looking at the display. Where models differ is in the testing that follows.
Can an out-of-warranty refrigerator be repaired?
Yes. Plenty of side-by-side and French-door units have run in kitchens for years. The price goes in writing before we start, repairs carry a 30-day workmanship warranty, and we say so candidly when a repair is not worth doing.
Why should I write down every character after the F?
The characters identify the entry in the control's list, and that tells a technician which circuit to test first. Reporting only the F means starting from scratch, while the full code speeds up testing.
Can a flashing F clear on its own?
It can, if it was a one-time event such as a power dip. A power cycle often clears it. If the F comes back, the control is flagging the same circuit again and testing is the next step.
Need help with FCodes?
We trace the cause in your home first and write the price down before any part is swapped.
