(813) 565-3059 Book a Repair
Whirlpool refrigerator error code

Whirlpool Bottom-Freezer FA EB: First Check Whether Cooling Is On

Whirlpool bottom-freezers like the WRB322DMBM may blink FA EB. Power-cycle, confirm the cooling setting is on, and get service if the code stays; EB is not tied to a named part.

Needs attention soonChecked November 2026

What does Whirlpool refrigerator code FA EB mean?

When a Whirlpool bottom-freezer such as the WRB322DMBM or WRB329DFBM blinks FA EB, Whirlpool's general flashing-F guidance applies. Cut power for a minute, restore it, confirm cooling is enabled, and watch the display. EB is not connected to any named sensor or fan. The code therefore says the control wants a circuit examined, and an accidental cooling-off setting is the first possibility to eliminate.

FA EB at a glance

Code
FA EB
Appliance
Whirlpool refrigerator
Applies to
Whirlpool bottom-freezer models such as WRB322DMBM and WRB329DFBM
Type
Needs attention soon
Can you clear it yourself?
Sometimes, after the safe checks below
Most likely cause
Cooling switched off at the control by a stray touch

What you may notice with FA EB

  • FA EB blinks on the panel
  • The cooling setting is off, or you are not sure it is on
  • Powering down clears the display for a while
  • The refrigerator slowly feels warmer than it should

How the refrigerator detects FA EB

Of all the things that can make the cooling function stop, the simplest is that someone turned it off. On these bottom-freezers the cooling setting lives on the control panel, and a stray touch or a power change can leave it off. When that happens the compartments warm slowly, and the display may show a flashing F code alongside.

That is why Whirlpool's routine for FA EB lists the cooling check next to the power cycle. The control also monitors its own sensor and fan circuits, and a reading outside the expected range produces the same flashing F. After a restart, the control reads every circuit again. If cooling is on and the code does not return, the cause was momentary. If it does return with cooling on, a circuit really is failing its check and the sensor, fan and wiring need to be tested.

Likely causes of FA EB

  • Cooling switched off at the control by a stray touch
  • A reading that fell outside the control's expected range
  • A sensor or fan plug making poor contact
  • A short outage that left the board unsettled

Can you keep using the refrigerator with FA EB?

First confirm cooling is on; if it was off, turning it on may end the problem. If cooling was already on and the code returns, you can still use the refrigerator while you watch the temperatures, but check them with a thermometer instead of by feel. If either compartment warms, shift food into a cooler and use another refrigerator until this one has been tested.

What you can safely check

  1. First open the cooling setting on the panel and confirm it is enabled; looking needs no unplugging.
  2. Then cut power for sixty seconds, at the breaker or by pulling the plug.
  3. Reconnect the power.
  4. Look at the display once a minute has passed.
  5. If FA EB flashes once more, don't open the doors and write down the time.
  6. Share that note when you contact us.

What our technician does for FA EB

  • Test the sensor, fan and wiring circuits
  • Read the control for the reading it flagged
  • Quote the work in writing first

How to keep FA EB from coming back

  • After cleaning the panel or a power change, glance at the cooling setting to make sure it still reads on.
  • Show everyone in the household which button area controls cooling, so it is not pressed by habit.

Technical reference

Code
FA EB
Appliance
Whirlpool refrigerator
Control family
Whirlpool bottom-freezer models such as WRB322DMBM and WRB329DFBM
Checked
November 2026

Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.

FAQ

FA EB questions

Could a setting be behind FA EB?

Whirlpool wants cooling confirmed as on once the power is back, so a setting is the first thing to rule out. When cooling is on and FA EB still blinks, the control itself needs testing.

What are the letters in FA EB?

Whirlpool does not explain the letters, so a technician traces the circuit on site and reports the findings in plain words before work starts.

Does the repair carry a warranty?

Yes. We offer thirty days of workmanship warranty on repairs, with the price in writing before we begin. If an older refrigerator is poor value to repair, we say that too.

How do I know whether cooling is really on?

Look at the control panel for the cooling setting and confirm it reads as enabled. If you cannot find it, check your Owner's Manual. A thermometer inside will also show whether the compartments are staying cold.

What if FA EB returns with cooling on?

Then the cooling setting was not the cause, and the control is flagging a circuit. Testing the sensor, fan and wiring circuits is the next step, since the owner steps have been used up.

Need help with FA EB?

We trace the cause in your home first and write the price down before any part is swapped.

Call Book a Repair
Call (813) 565-3059 Book a Repair