Whirlpool Bottom-Freezer FB EE: Service Only If the Reset Does Not Clear It
FB EE is another flashing F on Whirlpool bottom-freezers in the WRB322DMBM and WRB329DFBM range. Cycle the power with cooling on, watch the display, and arrange service only if the code stays.
What does Whirlpool refrigerator code FB EE mean?
FB EE is another blinking F on a Whirlpool bottom-freezer in the WRB322DMBM and WRB329DFBM range. Whirlpool responds as it does to the others: pull power for a minute, restore it, confirm cooling is on, and watch the display. Service is advised only when the code stays. The manual gives the EE characters no explanation, so we read the code as a request from the control for a circuit check.
FB EE at a glance
- Code
- FB EE
- Appliance
- Whirlpool refrigerator
- Applies to
- Whirlpool bottom-freezers in the WRB322DMBM and WRB329DFBM range
- Type
- Needs attention soon
- Can you clear it yourself?
- Sometimes, after the safe checks below
- Most likely cause
- A circuit outside the control's expected range, shown as FB EE
What you may notice with FB EE
- FB EE flashes on the panel
- The refrigerator runs and probably cools
- The display clears after a power cycle
- The F comes back later the same week
How the refrigerator detects FB EE
The EE in FB EE looks like a repeated letter, and it is tempting to read it as an echo of the first E. Nothing in what Whirlpool publishes supports that. The pair is simply another entry in the control's list, and the manufacturer assigns it no meaning for owners.
What the control does with it is straightforward. It keeps checking its circuits and flashes the F when one fails to answer within limits. Power removed for a minute causes a full restart. If the second pass is clean, the display stays quiet, and the cause was a passing one. If FB EE returns, the control is still unhappy with a circuit, and neither the display nor the owner steps can say which. Testing the sensor and fan circuits and their wiring at the refrigerator is how that gets settled.
Likely causes of FB EE
- A circuit outside the control's expected range, shown as FB EE
- A sensor or fan harness connection
- Cooling turned off
- A power surge or outage that left the board unsettled
Can you keep using the refrigerator with FB EE?
Yes, provided temperatures stay in range. Use a thermometer in both compartments once the power is back, and read it a second time a few hours on. If the code stays away, carry on and keep watching the display. If it returns, do not keep cycling the power; keep the doors closed as much as you can, put food in a cooler if either side warms, and have the circuits tested.
What you can safely check
- Take the refrigerator's power away for one minute, at the breaker or by the plug.
- Restore it.
- Look over the display for a cooling setting that got left off.
- Keep a lookout for FB EE over the following minute.
- A second flash means stop cycling the power and note the time.
- Then call us.
What our technician does for FB EE
- Test the sensor, fan and wiring circuits before naming a cause
- Check what the control flagged under EE
- Quote in writing first
How to keep FB EE from coming back
- Reset once when the code first appears, so a repeat is easy to spot.
- Check the cooling setting after outages, since a switched-off setting can mimic or accompany the code.
Technical reference
- Code
- FB EE
- Appliance
- Whirlpool refrigerator
- Control family
- Whirlpool bottom-freezers in the WRB322DMBM and WRB329DFBM range
- Maker documentation
- Whirlpool owner manuals and support
- Checked
- November 2026
Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.
Related Whirlpool refrigerator error codes
FB EE questions
Do FB EE and FB EB mean different things?
Whirlpool gives both the same routine: power cycle, cooling on, service if the code stays. Which circuit sits behind each pair is settled by testing.
What if FB EE disappears and comes back next week?
Record the dates. A code that returns after a reset is genuine, and the dates help us trace it. Arrange a visit rather than waiting until cooling is affected.
Is there a warranty on your repairs?
There is. Repair work carries a 30-day workmanship warranty, and the written price reaches you before anything starts, so nothing comes as a surprise.
Does the double E in FB EE mean something special?
No. Whirlpool gives it no separate meaning. It is another pair in the control's list, and its circuit is identified by reading the control and testing, not by the repeated letter.
Is it safe to leave FB EE showing for a few days?
The code names no hazard, but it means a circuit failed a check. Watch temperatures daily and have the refrigerator tested if the code stays or food begins to warm.
Need help with FB EE?
We trace the cause in your home first and write the price down before any part is swapped.