(813) 565-3059 Book a Repair
Whirlpool dishwasher error code

Whirlpool Dishwasher F8E1 or H20 Error: No Water Detected

F8E1, or H20 on some displays, tells you the dishwasher is not detecting water, and the WDT730PAHZ is one Whirlpool built-in model that shows it. The control asked for a fill and saw none, so the cycle waits or stops.

Needs attention soonChecked November 2026

What does Whirlpool dishwasher code F8E1 mean?

Whirlpool built-in models like the WDT730PAHZ show F8E1, which can also appear as H20, when no water is detected. The control called for the tub to fill and saw no water arrive, so the cycle pauses or stops. The simplest explanations are a closed supply valve or a kinked fill hose. If both are fine, the path the water takes into the dishwasher needs testing.

F8E1 at a glance

Code
F8E1
Appliance
Whirlpool dishwasher
Applies to
Whirlpool built-in dishwashers such as the WDT730PAHZ
Type
Needs attention soon
Can you clear it yourself?
Sometimes, after the safe checks below
Most likely cause
A supply valve under the sink that is partly or fully closed

What you may notice with F8E1

  • F8E1 or H20 appears on the display
  • The dishwasher never starts filling, or stops during the fill
  • The tub stays dry or nearly dry
  • No sound of water entering the dishwasher

How the dishwasher detects F8E1

Before a wash begins, the dishwasher opens its inlet valve and waits for the tub to fill. The control watches for water to show up within a reasonable time, using level sensing in the tub. F8E1, shown on some displays as H20, is the control's report that it called for water and did not detect any.

The path from the wall to the tub has several places to fail. The shutoff valve under the sink may be closed or worn. The fill hose may be kinked behind the dishwasher. The inlet valve may not pass water, and the level sensing might not register the water that arrives. Low water pressure in the home can also leave the tub looking empty to the control. Owners can check the first two items easily; the rest need testing.

Likely causes of F8E1

  • A supply valve under the sink that is partly or fully closed
  • A fill hose that is kinked or pinched
  • The inlet valve and its connection
  • The water level sensing in the tub

Can you keep using the dishwasher with F8E1?

Not until water reaches the tub. Open the supply valve, straighten the hose and press Start to see whether the dishwasher fills. If it fills and finishes the cycle, you can keep using it. Should F8E1 or H20 return with no water entering, stop the cycle and have us test the inlet valve and the level sensing.

What you can safely check

  1. Stop the cycle and look at the floor around the dishwasher; if water is present, close the valve before going further.
  2. Confirm the shutoff valve under the sink is fully open.
  3. Follow the supply hose and straighten any kink, especially where it bends behind the unit.
  4. With the supply corrected, press Start and the dishwasher attempts the fill again before carrying on with the cycle.
  5. If F8E1 or H20 stays and no water arrives, stop the cycle and call us.

What our technician does for F8E1

  • Test the inlet valve and its connection.
  • Check the water level sensing in the tub.
  • Test whether low house water pressure is part of the problem.

How to keep F8E1 from coming back

  • Leave the shutoff valve under the sink fully open, and open it again after any plumbing work.
  • Keep the supply hose free of sharp bends when the dishwasher is pushed back into place.

Technical reference

Code
F8E1
Appliance
Whirlpool dishwasher
Control family
Whirlpool built-in dishwashers such as the WDT730PAHZ
Checked
November 2026

Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.

Models

Whirlpool models that can show F8E1

Models named for this code in Whirlpool documentation that have a page here. Check the full model number on the rating label before you act on a code.

FAQ

F8E1 questions

Why would the display show H20 instead of F8E1?

Both report the same condition, a dishwasher that is not detecting water. Different displays write it one way or the other, so check the supply and the hose either way.

Will pressing Start restart the fill?

Yes, once the supply is corrected, Start makes the dishwasher try the fill again and pick up the cycle. You do not need to begin from the beginning.

Can an old shutoff valve cause F8E1?

Yes. A worn valve under the sink can restrict flow even when it looks open, so the dishwasher still sees no water. We look at both that valve and the dishwasher's inlet valve.

Could low water pressure at home trigger this code?

Yes, weak pressure can keep the tub from registering water. We cannot tell without testing, so we check the fill path as a whole, including the pressure side.

What should I mention about the code?

Tell us whether the display said F8E1 or H20, whether the supply valve was open, and whether pressing Start produced any water. Those answers narrow the cause quickly.

Need help with F8E1?

We trace the cause in your home first and write the price down before any part is swapped.

Call Book a Repair
Call (813) 565-3059 Book a Repair