(813) 565-3059 Book a Repair
Whirlpool dishwasher error code

Whirlpool Dishwasher 8 Pause 5 Pause Blinks: Fill Valve Stuck Open (F8E5)

F8E5 on an older-style Whirlpool built-in dishwasher shows as eight blinks, a pause and five blinks. The potential cause given is a fill valve stuck open, so water can keep coming in.

Stop using it until checkedChecked November 2026

What does Whirlpool dishwasher code 8 Pause 5 Pause mean?

On an older Whirlpool built-in dishwasher, F8E5 appears as eight blinks, a pause and five blinks. The potential cause given is a fill valve that has stuck open, which lets water continue to enter the machine. An alarm may sound, and the lights repeat the pattern. Since too much water can reach your floor, this code needs quick action.

8 Pause 5 Pause at a glance

Code
8 Pause 5 Pause
Appliance
Whirlpool dishwasher
Applies to
Older Whirlpool built-in dishwashers that report by blinking lights
Type
Stop using it until checked
Can you clear it yourself?
No, stop using it until it is checked
Most likely cause
A fill valve that stays open

What you may notice with 8 Pause 5 Pause

  • The lights blink eight times, pause, then five times
  • An alarm tone sounds from the dishwasher
  • Water keeps running into the tub without stopping
  • Water may reach the floor around the dishwasher

How the dishwasher detects 8 Pause 5 Pause

On these older dishwashers a blink count of eight, a pause and five reads as F8E5. The code is about the fill valve, the part that opens to let water into the tub and closes when the level is right. The stated potential cause is a valve stuck open, so water keeps coming after the control has asked it to stop.

The control watches the water level and expects the valve to close once the tub is full. If water keeps entering, the control sounds the alarm and repeats the blink pattern as a warning. Whether the valve itself is stuck or the control is failing to close the fill circuit can only be told by testing. In the meantime the machine has no way to stop the water except by closing the supply, which is why the owner steps focus on shutting the water first.

Likely causes of 8 Pause 5 Pause

  • A fill valve that stays open
  • Water continuing to run into the tub
  • A control that fails to close the fill circuit

Can you keep using the dishwasher with 8 Pause 5 Pause?

No. Do not run another cycle until the dishwasher has been checked. A fill valve stuck open can let water keep entering, and that can spill onto the floor. Shut off the water supply, silence the alarm with Cancel and keep the door closed. If water has already reached the floor, keep the dishwasher unplugged or its breaker off, and do not use it until it has been inspected.

What you can safely check

  1. Turn off the water supply to the dishwasher at its valve if you can.
  2. Press Cancel once to quiet the alarm, then keep the door shut.
  3. While the water is off, leave the power on as this code instructs.
  4. If you cannot shut off the water, switch off power to the dishwasher at the breaker instead.
  5. Look for water on the floor, and stay clear of the plug if the area is wet.
  6. Call us before running another cycle.

What our technician does for 8 Pause 5 Pause

  • Test the fill valve to see whether it stays open.
  • Check the water-level circuit that tells the control when to close the valve.
  • Test the control output to the fill circuit.

How to keep 8 Pause 5 Pause from coming back

  • Know where your dishwasher's water shutoff valve is, so you can close it quickly.
  • If this code has appeared before, do not run the dishwasher while you are away from home or asleep.

Technical reference

Code
8 Pause 5 Pause
Appliance
Whirlpool dishwasher
Control family
Older Whirlpool built-in dishwashers that report by blinking lights
Checked
November 2026

Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.

FAQ

8 Pause 5 Pause questions

What does F8E5 mean in plain words?

It means the fill valve may be stuck open, letting water keep entering after the tub should be full. Shut the supply, silence the alarm with Cancel and call us before another cycle.

Why leave the power on at first?

For this code the guidance is to silence the alarm, keep the door shut and leave power on as long as the water supply can be turned off. If the supply cannot be shut off, switch the power off instead.

What should I do about wet flooring after F8E5?

Soak up standing water, keep the dishwasher unplugged and off until it has been inspected, and watch nearby cabinets for dampness. Water that kept filling can reach the floor quickly.

Is F8E5 the same as F8E4?

No. F8E4 concerns water not filling as expected, with supply and float checks first, while F8E5 concerns a fill valve stuck open and too much water. They share the F8 start but call for different checks.

What details should I have ready for F8E5?

Tell us you saw eight blinks, a pause and five blinks, whether the alarm sounded, and whether water reached the floor. That tells us how urgently the fill valve and the level circuit need testing.

Need help with 8 Pause 5 Pause?

We trace the cause in your home first and write the price down before any part is swapped.

Call Book a Repair
Call (813) 565-3059 Book a Repair