Whirlpool Dishwasher 10 Pause 5 Pause Blink Code: F10E5 Diverter Leak
Five blinks after a pause that follows ten blinks make F10E5, which some displays write as FAE5, on an older-style Whirlpool built-in dishwasher. The potential cause is a diverter leak, so water has turned up inside where it does not belong.
What does Whirlpool dishwasher code 10 Pause 5 Pause mean?
On an older Whirlpool built-in dishwasher, ten blinks, a pause and five more blinks make up F10E5, which can also appear as FAE5. The potential cause given is a leak at the diverter, so the dishwasher has detected water inside where none belongs. The dishwasher may stop and keep repeating the light pattern. It is a leak-related code and deserves a look at the floor before any restart.
10 Pause 5 Pause at a glance
- Code
- 10 Pause 5 Pause
- Appliance
- Whirlpool dishwasher
- Applies to
- Older Whirlpool built-in dishwashers using flashing-light codes
- Type
- Stop using it until checked
- Can you clear it yourself?
- No, stop using it until it is checked
- Most likely cause
- A leak at the diverter itself
What you may notice with 10 Pause 5 Pause
- The lights blink ten times, pause, then blink five times
- The dishwasher may stop in the middle of a cycle
- Water or dampness under or around the dishwasher
- The same pattern returns until the cycle is canceled
How the dishwasher detects 10 Pause 5 Pause
Older Whirlpool built-in dishwashers announce errors with blinking lights. The first run of blinks is the F number, a pause follows, and then comes the E number, so ten blinks and five blinks give F10E5, which the display may render as FAE5.
This code is tied to leak detection. The diverter directs water inside the machine, and a leak there lets water reach a place the control treats as wrong. Water collecting in the base can also trip the detection. The control does not know whether the water is a real leak or a misreading; it only knows that the detector reported water. So it stops the cycle and repeats the pattern. That is why the first step is looking under and around the dishwasher: a dry floor and tight connections point away from a real leak, while wet ones settle the question.
Likely causes of 10 Pause 5 Pause
- A leak at the diverter itself
- Water connections beneath the dishwasher that are loose or dripping
- Water pooling in the base that sets off the leak detection
Can you keep using the dishwasher with 10 Pause 5 Pause?
No, not until you have checked for water. If any water is on the floor or under the dishwasher, stop, shut off the supply and keep the unit unplugged until it has been inspected. A leaking dishwasher can damage flooring and cabinets. If everything is dry and the code clears after Cancel, run it again while watching for drips, and have us look at it if the pattern returns.
What you can safely check
- Stop the cycle, switch off the dishwasher's breaker or unplug it, and shut the water supply valve if you can reach it.
- Look under and around the dishwasher for water and check that the water connections look secure.
- If water is leaking or standing, keep the water off and the dishwasher unplugged until it has been inspected.
- If everything is dry, restore power and press the Cancel key twice.
- Try a new cycle.
- If the error returns, call us.
What our technician does for 10 Pause 5 Pause
- Trace the water to its source, from the diverter to the connections.
- Test the diverter and its seals for leakage.
- Check the base for water that is triggering the leak detection.
How to keep 10 Pause 5 Pause from coming back
- Check the connections under the dishwasher now and then for drips or damp spots.
- Wipe up water that lands near the dishwasher base after spills so it does not trip the leak detection.
- Do not run cycles while water stands in the base.
Technical reference
- Code
- 10 Pause 5 Pause
- Appliance
- Whirlpool dishwasher
- Control family
- Older Whirlpool built-in dishwashers using flashing-light codes
- Maker documentation
- Whirlpool owner manuals and support
- Checked
- November 2026
Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.
Related Whirlpool dishwasher error codes
10 Pause 5 Pause questions
Is F10E5 the same as FAE5?
Yes, both describe the same diverter leak on these older Whirlpool dishwashers. Some displays print the F number as a letter, yet the cause and what we check stay the same.
Can I run a cycle while F10E5 shows?
Not if you see any water. With a leak present, shut off the supply and keep the unit unplugged until it is inspected. If it is dry and the code clears after Cancel and a restart, you can run it carefully while watching for water.
Could F10E5 be a false alarm?
It could. A pattern that returns means the leak detection is still triggering, which can reflect a real leak or a false reading, so we find the source of the water before deciding anything.
What happens if I ignore F10E5?
A real diverter leak keeps letting water out, which can soak the floor and the cabinet base. The pattern also returns with every cycle, so the dishwasher stays out of use. Turn off the supply and have it looked at.
What details help you diagnose F10E5?
Tell us you see ten blinks, a pause and five blinks, whether any water was on the floor, and whether the code also appeared as FAE5. That lets us plan the checks before we arrive.
Need help with 10 Pause 5 Pause?
We trace the cause in your home first and write the price down before any part is swapped.