Whirlpool Dishwasher 9 Pause 1 Pause Blinks: F9E1 Long Drain Explained
F9E1 is the code behind nine blinks, then a pause, then one blink, on an older-style Whirlpool dishwasher. A long drain is the cause: water is slow to leave the tub, so the cycle halts.
What does Whirlpool dishwasher code 9 Pause 1 Pause mean?
F9E1 appears on an older Whirlpool built-in dishwasher as nine blinks, a pause and one blink. The code stands for a long drain: water leaves the tub too slowly, so the cycle halts and the pattern repeats. Checks cover the drain line, the filter, the hose and the connection to the garbage disposer.
9 Pause 1 Pause at a glance
- Code
- 9 Pause 1 Pause
- Appliance
- Whirlpool dishwasher
- Applies to
- Older Whirlpool built-in dishwashers with blink-code lights
- Type
- Needs attention soon
- Can you clear it yourself?
- Sometimes, after the safe checks below
- Most likely cause
- A filter packed with debris
What you may notice with 9 Pause 1 Pause
- The lights blink nine times, pause, then once
- Water stays in the bottom of the tub
- The cycle stops before it finishes
- The dishwasher was recently connected to a disposer
How the dishwasher detects 9 Pause 1 Pause
Older Whirlpool dishwashers blink the F number, pause, then blink the E number. Nine blinks, a pause and one blink read as F9E1, which concerns draining. After each wash or rinse, the drain pump pushes water out through the drain hose, and the control expects the tub to empty within a reasonable time. If it takes too long, the control calls it a long drain, stops the cycle and repeats the pattern.
Many of the checks sit in the water's path out. Debris in the filter holds water back. A kinked, pinched or clogged hose narrows the way. A garbage disposer that was just connected can still have its knockout plug in place, which closes the inlet. When all of those are clear, the pump itself, or the control driving it, becomes the suspect.
Likely causes of 9 Pause 1 Pause
- A filter packed with debris
- A drain hose that is kinked, pinched or blocked
- A knockout plug still in the disposer inlet after a new hookup
- The drain pump or its control once the line is clear
Can you keep using the dishwasher with 9 Pause 1 Pause?
Not while water stays in the tub. Check the filter, the hose and the disposer connection first. If the dishwasher then drains and the pattern stays away, you can use it again. If water remains after the checks, stop running cycles and have us look at it. Standing water may be warm, so let it cool before reaching in and keep the power off while you work.
What you can safely check
- Stop the cycle, then unplug the dishwasher or switch its breaker off before you reach inside; let standing water cool first.
- Follow the drain line from the rear of the dishwasher to the sink and look for kinks.
- Take out the filter and rinse it clean under running water.
- With a disposer attached, make sure it is empty and the knockout plug has been taken out.
- Restore power after waiting 30 seconds.
- If water still will not drain, call us.
What our technician does for 9 Pause 1 Pause
- Test the drain pump.
- Check the drain path from the tub through the hose to the sink or disposer.
- Test the control that runs the pump.
How to keep 9 Pause 1 Pause from coming back
- Rinse the filter regularly so food bits do not build up and slow the drain.
- Check that the drain hose is not kinked or pinched after the dishwasher is pushed back into place.
- After a new disposer is connected, confirm the knockout plug was removed.
Technical reference
- Code
- 9 Pause 1 Pause
- Appliance
- Whirlpool dishwasher
- Control family
- Older Whirlpool built-in dishwashers with blink-code lights
- Maker documentation
- Whirlpool owner manuals and support
- Checked
- November 2026
Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.
Related Whirlpool dishwasher error codes
9 Pause 1 Pause questions
What does a long drain mean?
The dishwasher is not emptying its water as fast as the control expects, so it stops the cycle. Start with the filter, the drain hose and the disposer connection.
How do I know whether the disposer plug was left in?
A newly connected disposer has a knockout plug inside the dishwasher inlet, and it has to come out. Left in place, it keeps wash water from leaving. Check it with the disposer switched off.
Is standing water in the tub with F9E1 an emergency?
Not by itself, but do not keep running cycles. The tub holds water because the drain is slow or blocked, so check the filter and hose, and call us if those checks do not help.
Is F9E1 the same as a clog in my sink?
Not exactly. A clogged sink line can slow the dishwasher drain, but F9E1 also covers a dirty filter, a bent hose and the drain pump. Check whether the sink drains normally, then work through the dishwasher's filter and hose.
Can I clear F9E1 by cycling the power?
Cycling power for 30 seconds is part of the check, and a passing glitch can clear. If water still will not leave afterward, the cause is physical, a blocked path or the pump, and further resets will not move the water.
Need help with 9 Pause 1 Pause?
We trace the cause in your home first and write the price down before any part is swapped.