Whirlpool Dishwasher FAE5 or F10E5: Diverter Leak Detected
Water has been detected escaping near the diverter when a Whirlpool built-in unit like the WDF520PADM shows FAE5, which some displays write as F10E5. Check the floor before restarting anything.
What does Whirlpool dishwasher code FAE5 mean?
A Whirlpool built-in model like the WDF520PADM reports a diverter leak with FAE5, and some displays write the same code as F10E5. The diverter steers wash water inside the machine, so water escaping there puts your floor and cabinet at risk. The display shows the code, there may be moisture under the dishwasher, or the cycle may simply have halted. Check the floor before restarting anything.
FAE5 at a glance
- Code
- FAE5
- Appliance
- Whirlpool dishwasher
- Applies to
- Whirlpool built-in dishwashers such as the WDF520PADM
- Type
- Stop using it until checked
- Can you clear it yourself?
- No, stop using it until it is checked
- Most likely cause
- A diverter housing or seal that is weeping water
What you may notice with FAE5
- FAE5 or F10E5 appears on the display
- Moisture shows under or around the dishwasher
- The cycle stops and will not restart
- The same code returns after pressing Cancel twice
How the dishwasher detects FAE5
The diverter steers wash water inside the dishwasher. Because it handles water under pressure during the cycle, the housing or seal around it is a place where weeping can start. Leak sensing in the base watches for water where it does not belong, and when it finds some, the control stops the cycle and shows FAE5, written F10E5 on some displays.
The sensing cannot tell a real leak from an old spill that is still sitting there. Loosened water connections can also drip, and water that collects under the tub can keep the sensing tripped. A fitting that looks dry may still drip once the cycle builds pressure, and nothing inside the tub area can be seen without access to the diverter. For that reason the first step is always the floor and cabinet, followed by tracing the source before any restart.
Likely causes of FAE5
- A diverter housing or seal that is weeping water
- Water connections that have worked loose
- Water pooling under the tub
- Leak sensing tripped by an earlier spill
Can you keep using the dishwasher with FAE5?
Not until you have looked for water. If you find any, shut off the supply, wipe it up and leave the dishwasher unplugged until it has been inspected, because a genuine leak can harm the floor and cabinet as time goes on. If everything is dry and the code clears after the checks, you may try a cycle. If FAE5 or F10E5 comes back, stop using it.
What you can safely check
- Stop the cycle, switch off the breaker or unplug the dishwasher, and close the supply valve if you can reach it.
- Check under and around the dishwasher for water, and see that the water connections look secure.
- Wipe up any water you find.
- Restore power and press Cancel twice.
- Try a new cycle.
- If the error returns, call us and leave the dishwasher unused until we have looked.
What our technician does for FAE5
- Trace where the water is coming from.
- Inspect the diverter housing and its seal.
- Check the floor and cabinet for water damage.
How to keep FAE5 from coming back
- Check under the dishwasher now and then for damp spots or drips from the connections.
- Dry any spill near the base promptly so old water does not keep the leak sensing tripped.
Technical reference
- Code
- FAE5
- Appliance
- Whirlpool dishwasher
- Control family
- Whirlpool built-in dishwashers such as the WDF520PADM
- Maker documentation
- Whirlpool owner manuals and support
- Checked
- November 2026
Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.
Whirlpool models that can show FAE5
Models named for this code in Whirlpool documentation that have a page here. Check the full model number on the rating label before you act on a code.
Related Whirlpool dishwasher error codes
FAE5 questions
How do I know a diverter leak is real?
Check the floor beneath and beside the dishwasher for water. A dry floor with tight connections points away from a real leak, but a fitting that looks dry can still drip once the cycle builds pressure.
Can FAE5 and F10E5 differ?
They name the same diverter leak. Which one you see depends on the display, and our checks do not change.
Can a past spill set off the leak sensing?
Yes. Leak sensing can trip after an earlier spill, and water collecting under the tub can keep it tripped. Dry the area and press Cancel twice; if the code returns, we trace the source.
What if I ignore FAE5 because it clears?
A returning code means the leak sensing is still triggering, whether from a real leak or a false reading. Water that escapes over time can damage the floor and cabinet, so find the source.
What details help with FAE5?
Tell us the model, whether you found water, and whether the display showed FAE5 or F10E5. That helps us plan the checks of the diverter and its connections.
Need help with FAE5?
We trace the cause in your home first and write the price down before any part is swapped.
