Whirlpool Dryer Code 0E: Breaker Reset and What We Check
0E on a Whirlpool WED or WGD dryer is a control error with no named part behind it. The only published remedy is a breaker reset, and a code that returns needs testing.
What does Whirlpool dryer code 0E mean?
A 0E on Whirlpool electric and gas dryers in the WED and WGD series, Cabrio and Duet generations included, such as the WED5000DW, is a control error that the brand's guidance ties to no named part. What it does give is a power-reset routine. You see 0E in the display and the dryer will not run its cycle. Since no cause is published, we do not guess one. We look for it by testing the control and the connections around it.
0E at a glance
- Code
- 0E
- Appliance
- Whirlpool dryer
- Applies to
- Whirlpool WED and WGD electric and gas dryers
- Type
- Needs attention soon
- Can you clear it yourself?
- Sometimes, after the safe checks below
- Most likely cause
- Main control board and its connections
What you may notice with 0E
- 0E on the display of a WED or WGD dryer
- A dryer that will not start its cycle
- A cycle that stops soon after starting
- The code returning after a breaker reset
How the dryer detects 0E
The control board watches the dryer through its sensor inputs and the wiring that carries them. It decides when the dryer may start, how long it runs and when it must stop. When it reads something it cannot sort out, it shows an error instead of running the cycle.
For 0E, the brand names no part and no cause. It gives only a power-reset routine. Cutting the breaker for 5 minutes lets the control restart from a clean state, which clears a passing electronic error. If the code was a one-time event, the dryer runs normally afterward. If the cause is real, such as a loose connection or a failing input, the code returns, and the control and its harness have to be tested to find it.
Likely causes of 0E
- Main control board and its connections
- Wiring harness to the control
- A passing electronic error that a full power-down clears
- Sensor input to the control
Can you keep using the dryer with 0E?
After one breaker reset, you can start a timed dry cycle and watch the dryer. If 0E stays away and the dryer heats and tumbles normally, carry on. If the code returns, stop using the dryer rather than resetting it again and again. Because no cause is published, we cannot say whether the problem is minor until the control has been tested.
What you can safely check
- Stop the dryer and switch off its circuit breaker or breakers at the panel, since the power must be fully off.
- Leave them off for 5 minutes.
- Switch the breaker or breakers back on and start a timed dry cycle.
- Watch the dryer for one minute to be sure 0E does not return.
- If it comes back, stop using the dryer and call us.
What our technician does for 0E
- Test the main control board
- Inspect the harness and connectors to the control
- Check the sensor input the control reads
- Give a written price before replacing any part
How to keep 0E from coming back
- Keep the dryer on its own breaker and the cord or hard wiring firmly connected
- Use a surge protector rated for large appliances where storms or power dips are common
- Avoid cycling the breaker repeatedly to clear the code, since it hides what the control saw
- Keep the cabinet and lint area clean so connections stay dry and free of buildup
Technical reference
- Code
- 0E
- Appliance
- Whirlpool dryer
- Control family
- Whirlpool WED and WGD electric and gas dryers
- Maker documentation
- Whirlpool owner manuals and support
- Checked
- November 2026
Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.
Related Whirlpool dryer error codes
0E questions
What does 0E tell me about my dryer?
The brand's guidance for 0E names no part or cause and offers only a power-reset routine. That tells us the code sits in the control, so we test it before replacing anything.
How long should the breaker stay off for 0E?
Five minutes. Turn the dryer's breaker or breakers off, wait the full five minutes, switch them on again, then start a timed dry cycle and watch it for one minute.
Is it safe to keep using the dryer if 0E returns?
We would not. A repeat of the code means the reset did not clear it. Leave the dryer off until the control has been tested.
Is 0E covered by my warranty?
That depends on your model, its age and the terms that came with it. Please check your warranty terms before any work, and keep the model number handy so the question can be answered quickly.
What should I tell you about 0E on the phone?
Give us the model number if you can read it, say whether the dryer is electric or gas, and tell us whether a breaker reset cleared the code even for a short time. That helps us plan the first tests.
Need help with 0E?
We trace the cause in your home first and write the price down before any part is swapped.