Whirlpool Dryer do Code: Door Open When Starting
The lowercase do code on a Whirlpool WED or WGD dryer shows when the dryer is started with the door open or ajar. Close it fully until it latches. A repeat points to the switch or latch.
What does Whirlpool dryer code do mean?
The code do, in lowercase, appears on Whirlpool electric and gas dryers in the WED and WGD series, Cabrio and Duet generations included, such as the WED5000DW. It shows when someone tries to run the dryer with the door open or ajar. The first fix is to verify the door is completely closed and latched. If do still appears after that, the door switch or latch probably needs a service call.
do at a glance
- Code
- do
- Appliance
- Whirlpool dryer
- Applies to
- Whirlpool WED and WGD electric and gas dryers
- Type
- Normal status, not a failure
- Can you clear it yourself?
- Yes, it is a normal message or setting
- Most likely cause
- Door not closed completely
What you may notice with do
- do in lowercase on the display
- A dryer that will not start after you press Start
- A door that looks closed but may not be latched
- A sock or clothing at the door edge
How the dryer detects do
Before a dryer lets the drum turn or the heat come on, it checks that the door is shut. A latch holds the door and a switch tells the control whether the latch is engaged. If the control does not receive the closed signal when you press Start, it refuses to begin and shows do.
The most common reason is the plain one: the door was open or only pushed to, not latched. Clothing or the edge of the lint screen can keep the door from closing all the way. A worn latch or strike, or a door switch that does not register, can produce the same result with a door that looks closed. Worn latches can work on some days and fail on others, which is why do can come and go. The cure for the plain case is simply to close the door firmly until it latches.
Why do appears
- Door not closed completely
- Clothing or a lint screen edge keeping the door from latching
- Door latch or strike worn
- Door switch not registering a closed door
Can you keep using the dryer with do?
Yes, the dryer is fine to use once the door is closed and latched. Do not try to bypass the door switch, because it is a safety lockout. Clear anything caught at the edge and close the door firmly. If do keeps appearing with the door latched, stop and have the door switch and latch checked before the next load.
What you can safely check
- Before touching the door area, switch off the dryer breaker or pull the plug.
- Open the door and remove anything caught at its edge.
- Close the door firmly until it is completely closed and latched.
- Press Start again.
- If do remains, call us, since it will probably need a service call.
What our technician does for do
- Test the door latch and strike
- Test the door switch
- Check the wiring to the switch
How to keep do from coming back
- Check that nothing hangs over the door edge before you close it
- Push the door firmly until you feel the latch catch
- Keep the lint screen seated fully so it does not hold the door open
- Avoid leaning on or slamming the door, which wears the latch
Technical reference
- Code
- do
- Appliance
- Whirlpool dryer
- Control family
- Whirlpool WED and WGD electric and gas dryers
- Maker documentation
- Whirlpool owner manuals and support
- Checked
- November 2026
Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.
Related Whirlpool dryer error codes
do questions
What does the do code on a dryer mean?
It means the dryer was started with the door open or not fully closed. Close it completely so it latches, then start the cycle again.
Why does do show up with the door closed?
The door may be closed but not latched, or the door switch may not be registering. If the door is firmly latched and do stays, the switch or latch needs service.
Is do a safety lockout?
In effect, yes. The dryer will not run unless it senses a closed door. That is by design, so please do not try to bypass it, and call us if it will not clear.
Will do clear by itself?
Yes, once the door is closed and latched and you press Start again, the dryer runs. If do keeps returning with the door firmly latched, a worn latch or a door switch that is not registering is the likely reason, and it needs testing.
Is do the same as ERR?
They are alike, since both involve the door not being fully latched. ERR is shown on some models for a door that is not latched, and do is shown when the dryer is started with the door open. The checks are very similar.
Something else going on with your dryer?
We trace the cause in your home first and write the price down before any part is swapped.