(813) 565-3059 Book a Repair
Whirlpool dryer error code

Whirlpool Dryer ERR Code: Door Not Latched

ERR on a Whirlpool WED or WGD dryer shows when the door is not completely closed and latched. Push it firmly shut, and on some models make sure both latches are secure.

Normal status, not a failureChecked November 2026

What does Whirlpool dryer code ERR mean?

ERR on Whirlpool electric and gas dryers in the WED and WGD series, Cabrio and Duet generations included, such as the WGD5000DW, appears when the door has not been completely closed and latched. The dryer will not run unless the door is closed. A door can look shut without being latched, and some models have an upper and a lower latch, both of which must be secure before the dryer starts.

ERR at a glance

Code
ERR
Appliance
Whirlpool dryer
Applies to
Whirlpool WED and WGD electric and gas dryers
Type
Normal status, not a failure
Can you clear it yourself?
Yes, it is a normal message or setting
Most likely cause
Door not pushed far enough to engage the latch or latches

What you may notice with ERR

  • ERR on the display when you press Start
  • A dryer that will not start with the door looking closed
  • A door that rests against the frame without latching
  • An item caught at the door edge

How the dryer detects ERR

A dryer refuses to start unless its door is closed and latched. A latch holds the door, and a switch tells the control whether the latch has engaged. When you press Start, the control reads that signal. If it does not say closed, the dryer will not run and shows ERR.

The cause can be simple. A door can rest against the frame and look shut without the latch having caught, so a firm push is needed. Some models have an upper latch and a lower latch, and both must be secure before the dryer starts. Something caught in the door edge can also keep it from latching. If the door is firmly latched and ERR remains, the switch may not be registering the closed door, or the latch may be worn, and that needs testing.

Why ERR appears

  • Door not pushed far enough to engage the latch or latches
  • Upper or lower latch not securing
  • Something caught in the door edge
  • Door switch not registering

Can you keep using the dryer with ERR?

Yes, once the door is firmly latched, the dryer is fine to use. The dryer will not run with the door open by design, so do not try to bypass the switch. Push the door shut, clear the edge and start again. If ERR returns with the door securely latched, stop and have the latch and switch tested.

What you can safely check

  1. Pull the plug or switch off the breaker first, then work on the door area.
  2. Push on the door to engage the latch or latches, and on models with upper and lower latches make sure both are secure.
  3. Clear anything caught at the door edge.
  4. If ERR stays, turn the dryer's breaker or breakers off for one minute, then back on.
  5. Start a timed dry cycle and watch it for one minute, and call us if ERR remains.

What our technician does for ERR

  • Test the latch and strike
  • Test the door switch
  • Check the wiring to the switch

How to keep ERR from coming back

  • Check that nothing hangs over the door edge before you close it
  • Push the door firmly until the latch catches, and on two-latch models make sure both are secure
  • Avoid slamming or leaning on the door, which wears the latch
  • Wipe lint from around the door opening so the latch moves freely

Technical reference

Code
ERR
Appliance
Whirlpool dryer
Control family
Whirlpool WED and WGD electric and gas dryers
Checked
November 2026

Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.

FAQ

ERR questions

Why does ERR show when my door looks closed?

A door can look shut without being latched. Push firmly on it. Some models have an upper and a lower latch, and both must be secure.

How long should the breaker be off for ERR?

One minute. Switch the dryer's breaker or breakers off, wait one minute, switch them on, start a timed dry cycle, and watch the display for a minute.

When does ERR need service?

If the door is firmly latched and the reset does not clear ERR, the latch or door switch may not be registering. They can be tested and a price quoted in writing first.

Will ERR clear by itself?

Yes, once the door is firmly latched and you press Start again. If ERR keeps coming back with the door secure, the latch may be worn or the door switch may not be registering, and the dryer needs a test of both.

Is ERR the same as the do code?

The two share one cause, a door that is not fully latched. Which one appears depends on the model. The first step is the same for both: clear the edge, push the door firmly shut and start the cycle again.

Something else going on with your dryer?

We trace the cause in your home first and write the price down before any part is swapped.

Call Book a Repair
Call (813) 565-3059 Book a Repair