Whirlpool Microwave Drawer 4d42: Fan Running Faster Than Expected
4d42 signals a cooling fan that is running too fast in a Whirlpool built-in unit or drawer. Airflow, the fan or its wiring are the areas to look at.
What does Whirlpool microwave code 4d42 mean?
A cooling fan running too fast is what 4d42 reports on Whirlpool microwave drawers and built-ins, the WMC50522AS among them. Look first at anything restricting airflow, then at the fan itself and the wiring connected to it. Because the speed measured is not the speed expected, the oven posts the code and can restrict heating until the fan reading is normal again.
4d42 at a glance
- Code
- 4d42
- Appliance
- Whirlpool microwave
- Applies to
- Whirlpool microwave drawers, fan speed above expected range
- Type
- Needs attention soon
- Can you clear it yourself?
- Sometimes, after the safe checks below
- Most likely cause
- Air path obstruction that changes how the fan runs
What you may notice with 4d42
- 4d42 is shown on the oven display
- The oven holds back heating while it runs
- The fan may sound different from usual
How the microwave detects 4d42
Inside the cabinet, a fan pulls air across the electronics, and the control keeps a running check on its speed. It expects a certain pace for each stage of cooking and compares it with the feedback it receives.
A reading above that pace makes the control raise 4d42. It cannot say whether the air path is obstructed, whether the fan itself is running outside its range or whether the harness connection is worn, so all three stay on the list. The oven may hold heating back while the reading is off. Cycling power clears a short-lived condition, and a repeat means testing.
Likely causes of 4d42
- Air path obstruction that changes how the fan runs
- Fan speed above what the control accepts
- Fan harness connector that is worn or slack
- A passing condition that a restart wipes away
Can you keep using the microwave with 4d42?
Leave the microwave off while 4d42 is showing, since the oven may restrict heating and the fan is not behaving as expected. Clear the vents, reset at the breaker and try a short cycle only if the code stays gone. If it returns, keep the oven switched off and do not remove panels to look for the fan.
What you can safely check
- Turn the microwave's breaker off and wait for the oven to cool.
- Clear anything that sits against the vents and brush away visible dust.
- Restore power and stay with the oven for a minute.
- See whether 4d42 appears and, if not, run a short cooking cycle.
- If it appears, leave the oven off and call us.
What our technician does for 4d42
- Test the fan's speed feedback against what the control expects
- Check the airflow path and the fan wiring
- Quote the price in writing before work starts
How to keep 4d42 from coming back
- Keep the microwave's vents uncovered, and do not stack items against the front or sides of a built-in unit.
- Dust the vent openings occasionally so air moves the way the fan expects.
Technical reference
- Code
- 4d42
- Appliance
- Whirlpool microwave
- Control family
- Whirlpool microwave drawers, fan speed above expected range
- Maker documentation
- Whirlpool owner manuals and support
- Checked
- November 2026
Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.
Related Whirlpool microwave error codes
4d42 questions
Why would my microwave fan be faster than it should be?
Restricted airflow, the fan or the wiring can each push the speed reading out of range. A technician tests them in turn rather than guessing at a part.
Does 4d42 mean the fan is loud?
Not necessarily. The code refers to measured speed, so a fan can sound normal yet read high. Measuring settles it.
Are older built-in microwaves worth repairing for this code?
Yes, many can be, once testing shows the cause. The cost of repair is weighed against the unit, and we say plainly if it is not worth it.
Could 4d42 be a passing condition?
It could, since a restart clears a short-lived condition. If the code returns after the reset, the fan speed feedback and the airflow path need to be tested.
What do I mention to the technician about 4d42?
Give the exact code, say whether the vents were blocked or dusty, and mention whether the reset cleared it. That tells us where to start measuring.
Need help with 4d42?
We trace the cause in your home first and write the price down before any part is swapped.