(813) 565-3059 Book a Repair
Whirlpool microwave error code

Whirlpool Microwave Call Service Message: Cancel, Then Reset Power

Call Service is a general alert on Whirlpool built-in microwaves and drawers. The control found an error it has no specific message for; press Cancel, then reset the power if the words return.

Needs attention soonChecked November 2026

What does Whirlpool microwave code Call Service mean?

Whirlpool built-in microwaves and drawers, WMC50522AS among them, display Call Service in cases where the control senses an error yet cannot name it. Cancel clears the display at first. If the words reappear, the oven's power needs a reset. Since no part is named, the source could be anywhere in the control system, and the oven may refuse to run while the words are showing.

Call Service at a glance

Code
Call Service
Appliance
Whirlpool microwave
Applies to
Whirlpool built-in microwaves, drawers, WMC50522AS
Type
Needs attention soon
Can you clear it yourself?
Sometimes, after the safe checks below
Most likely cause
A passing control glitch after a power event

What you may notice with Call Service

  • The words Call Service fill the display.
  • The oven may refuse to start or continue cooking.
  • Pressing Cancel clears it for a moment, then it returns.

How the microwave detects Call Service

The control in a built-in Whirlpool microwave watches several circuits at once: the door latch and switch, the keypad, and its own board and wiring. Most problems it finds come with a specific code that says where to look.

Call Service is what appears when the control has noticed something wrong but cannot attach a more exact message to it. That might be a short-lived glitch after a power event, or it might be a real problem in one of those circuits. Pressing Cancel acknowledges the message. If the control still sees the condition, the words return, and a power reset gives it a fresh start to read everything again before it decides whether to run.

Likely causes of Call Service

  • A passing control glitch after a power event
  • Trouble in the door latch and door switch circuit
  • The keypad or user interface
  • The control board or its wiring

Can you keep using the microwave with Call Service?

If Cancel or a breaker reset clears the message and the oven then runs normally, you can keep using it, but note when it appears again. A message that returns quickly means the cause is real. Stop using the microwave if it also shows another code, smells of burning, or has a door that will not close fully.

What you can safely check

  1. Stop any cycle; if you notice smoke or a burning smell, switch the breaker off and keep the door closed.
  2. Press Cancel once and see whether the words clear.
  3. If they come back, leave the breaker off for sixty seconds, then switch it on.
  4. Begin a short cycle, then watch the display for a minute.
  5. Make sure the oven works. If Call Service shows up again, call us.

What our technician does for Call Service

  • Read the error history to learn what raised the message
  • Test the door latch and switch circuit
  • Test the keypad and the control and its wiring

How to keep Call Service from coming back

  • After a storm or outage, let the power settle and press Cancel before starting anything.
  • Wipe the keypad and door area gently so grease does not build up around the pads and latch.

Technical reference

Code
Call Service
Appliance
Whirlpool microwave
Control family
Whirlpool built-in microwaves, drawers, WMC50522AS
Checked
November 2026

Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.

FAQ

Call Service questions

What makes Call Service different from a numbered code?

A numbered code names an area to check, while Call Service is a catch-all alert. The control saw a problem but has nothing more precise to display, so a reset comes first and testing follows if it returns.

How many times should Cancel be pressed?

Once is enough. If the words stay on screen, move on to the breaker reset instead. Pressing Cancel over and over does not repair a circuit problem.

Is the oven safe to use if it runs normally afterward?

Yes, if it runs normally and the message stays away, but note when it comes back. A repeat points to something intermittent, and finding it early can spare you a complete stop.

Does Call Service mean the control board has failed?

Not necessarily. The board is one possibility among several, along with the door circuit and the keypad. Because the message is generic, the real source is found by testing each of those.

What should I tell you about Call Service on the phone?

Describe whether Cancel cleared the message, whether the reset helped, and how soon it came back. Include the model, such as WMC50522AS if that is yours, and any other code you noticed.

Need help with Call Service?

We trace the cause in your home first and write the price down before any part is swapped.

Call Book a Repair
Call (813) 565-3059 Book a Repair