Whirlpool Microwave Message “Press Cancel to Reset”: What Comes Next
Press Cancel to Reset on a Whirlpool built-in microwave means the control noticed an error and wants a fresh start with the Cancel pad; Call Service afterward means a power reset.
What does Whirlpool microwave code Press Cancel to Reset mean?
A Whirlpool built-in microwave or drawer, the WMC50522AS for one, can display Press Cancel to Reset when its control detects an error. You are asked to tap the Cancel button or pad and begin again. Should Call Service follow, the next step is resetting power to the unit. Because nothing in the wording names a part, a retry comes first, ahead of any suspicion of a part.
Press Cancel to Reset at a glance
- Code
- Press Cancel to Reset
- Appliance
- Whirlpool microwave
- Applies to
- Whirlpool WMC50522AS built-in microwave, reset prompt
- Type
- Needs attention soon
- Can you clear it yourself?
- Sometimes, after the safe checks below
- Most likely cause
- A control error that Cancel clears
What you may notice with Press Cancel to Reset
- The words Press Cancel to Reset appear on the display
- Cooking stops until you answer the message
- Call Service may follow after you press Cancel
How the microwave detects Press Cancel to Reset
When the control of a built-in microwave senses an error it cannot sort out alone, it stops and asks for a restart. The words Press Cancel to Reset are that request. Pressing Cancel wipes the current entry and returns the control to a clean starting point, which is enough to remove many one-time errors.
If the error is still present afterward, the display moves on to Call Service, and the next instruction is to reset power at the breaker. That clears a stuck internal state more thoroughly than Cancel can. The message never names a part. Only when Call Service survives both steps does it become likely that the control board or its wiring has a lasting problem, which is where our testing begins.
Likely causes of Press Cancel to Reset
- A control error that Cancel clears
- A control state that a power reset clears
- A control board or wiring problem, if Call Service keeps coming back
Can you keep using the microwave with Press Cancel to Reset?
If Cancel, or Cancel plus one breaker reset, clears the message and a normal cycle runs, you can keep using the microwave. If Call Service stays or the message keeps returning, stop and leave the breaker off. A control that cannot recover from its own errors is a poor choice for a long cook cycle.
What you can safely check
- This needs no panel opening; the only power step is the breaker, and only if Call Service shows.
- Press the Cancel button or pad once, firmly, without holding it.
- When Call Service appears on the screen, switch this microwave's breaker off for a minute.
- Switch it on and run a bake cycle while you watch the screen for a minute.
- If Call Service stays after the power reset, stop using the unit and contact us.
What our technician does for Press Cancel to Reset
- Test the control and its wiring when Call Service remains
- Ask what you were doing when the message appeared
- Report the cause before any repair is approved
How to keep Press Cancel to Reset from coming back
- After an outage or flicker, reset the breaker once and let the display settle before cooking.
- Avoid pressing several pads at once while the control is busy, which can confuse a cycle in progress.
Technical reference
- Code
- Press Cancel to Reset
- Appliance
- Whirlpool microwave
- Control family
- Whirlpool WMC50522AS built-in microwave, reset prompt
- Maker documentation
- Whirlpool owner manuals and support
- Checked
- November 2026
Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.
Related Whirlpool microwave error codes
Press Cancel to Reset questions
Which pad does this message want?
Cancel, pressed one time. If Call Service shows up afterward, the breaker should go off for a minute and then back on. Holding the pad or trying other combinations adds nothing.
Does the message mean the microwave has died?
Not at all; the control noticed an error. Plenty of cases end after Cancel or a power reset. A Call Service message that comes back means the unit needs testing, and a note of what you were doing helps us repeat it.
What should I mention on the phone?
Tell us whether Call Service followed Cancel and whether the reset helped. Add what you were cooking and roughly when it started.
How does this message relate to Call Service?
They are linked but not identical. The first asks for Cancel, and Call Service can follow if the error remains. Each then leads to a power reset, and we test the control if it persists.
Can this message vanish without my pressing anything?
It waits for your response, so Cancel is the intended move. If the message comes back on its own afterward, the control is reporting something that deserves a test.
Need help with Press Cancel to Reset?
We trace the cause in your home first and write the price down before any part is swapped.