(813) 565-3059 Book a Repair
Whirlpool microwave error code

Whirlpool Microwave “Feature Not Available” Message

A scrolling Feature Not Available message on a Whirlpool built-in microwave means the control hit a snag while you were programming a cycle and asks you to retry or disable power.

Needs attention soonChecked November 2026

What does Whirlpool microwave code Feature Not Available mean?

Programming a cook cycle on a Whirlpool built-in microwave or drawer, a WMC50522AS for example, can bring up scrolling text that starts with Feature Not Available. The words with it tell you to press Enter and try again, or to disable power to clear the message. The control ran into a snag partway through your setup. It is a general message and names no part, so a retry comes before any suspicion.

Feature Not Available at a glance

Code
Feature Not Available
Appliance
Whirlpool microwave
Applies to
Whirlpool WMC50522AS built-in microwave, programming message
Type
Needs attention soon
Can you clear it yourself?
Sometimes, after the safe checks below
Most likely cause
A snag in the control while the cycle was being set up

What you may notice with Feature Not Available

  • Words scroll across the display while you program a cycle
  • The cycle you were setting up never gets going
  • The message offers a retry with Enter or a power cut

How the microwave detects Feature Not Available

While you enter a cook cycle, the control tests each choice against what the unit can do at that moment. When something does not add up, it stops and tells you in words instead of a number. The scrolling text opens with Feature Not Available, and the instructions beside it come from the manufacturer: retry with Enter, or cut power to clear.

That advice shows how the control sees things. A retry deals with a one-time stumble in the entry. Cutting power deals with an internal state that has become stuck. Neither points at a part, which is why the message stays general. If both steps fail and the message returns whenever you program the same cycle, the control board or the wiring serving it becomes the thing worth testing.

Likely causes of Feature Not Available

  • A snag in the control while the cycle was being set up
  • A temporary control state that cutting power wipes out
  • The control board or its wiring, when the message keeps coming back

Can you keep using the microwave with Feature Not Available?

If Enter or one breaker reset clears the message and a cook cycle then runs normally, you can keep using the microwave. If the message keeps returning, stop programming and leave the breaker off. A control that complains each time you set a cycle is not one to depend on for dinner.

What you can safely check

  1. Leave the cabinet closed and the breaker alone for now; nothing needs unplugging yet.
  2. Obey the scrolling words first and press Enter to retry.
  3. If the message returns, switch the microwave's breaker off for a minute at the panel, then back on.
  4. Program a bake cycle and keep the display in view for a minute.
  5. A message that survives the power reset means the control needs testing, so contact us.

What our technician does for Feature Not Available

  • Test the control and its wiring if the message repeats
  • Reproduce the message while a cycle is being programmed
  • Report the cause before you approve any repair

How to keep Feature Not Available from coming back

  • Enter cook settings in one steady sequence instead of tapping pads in quick bursts.
  • After a storm or outage, reset the breaker once and let the display settle before programming.

Technical reference

Code
Feature Not Available
Appliance
Whirlpool microwave
Control family
Whirlpool WMC50522AS built-in microwave, programming message
Checked
November 2026

Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.

FAQ

Feature Not Available questions

What exactly does the message ask of me?

It gives you two options. You can press Enter to retry, or you can cut the power, which means switching the microwave's own breaker off for a minute and then on again.

Has something broken when I see it?

It tells you the control noticed a problem during programming. A power reset can wipe it. If it keeps coming back, the control needs testing, so tell us what happened with Enter and with the breaker.

Why do I see it only while setting a cycle?

While you enter settings, the control tests itself, and that is the moment it speaks up. We try to recreate it during the visit, so remember which steps you took.

Does this message resemble a Call Service message?

Not quite. This one belongs to programming and asks for a retry or a power cut, while Call Service is a separate report. We treat both as general control messages that call for a power reset first.

What details help if the message keeps appearing?

Note which cycle and settings you were entering, and whether Enter or the breaker helped. Those details let us recreate the situation on the unit.

Need help with Feature Not Available?

We trace the cause in your home first and write the price down before any part is swapped.

Call Book a Repair
Call (813) 565-3059 Book a Repair