(813) 565-3059 Book a Repair
Whirlpool microwave error code

Whirlpool Microwave Drawer Code 1c2c: Panel and Wiring Check

1c2c on a Whirlpool built-in microwave or microwave drawer is a keypad circuit message. It names the touch panel or the wiring behind it, not a single failed part.

Needs attention soonChecked November 2026

What does Whirlpool microwave code 1c2c mean?

Owners of Whirlpool microwave drawers and built-in microwaves, for example model WMC50522AS, may see 1c2c on the display. It reports on the user interface circuit, which covers the keypad or touch panel and the wiring running from it to the oven's control. The code names an area to look at, not a failed part. The oven may not respond to the panel as it normally would until the condition is cleared.

1c2c at a glance

Code
1c2c
Appliance
Whirlpool microwave
Applies to
Whirlpool microwave drawers and built-ins with a keypad
Type
Needs attention soon
Can you clear it yourself?
Sometimes, after the safe checks below
Most likely cause
Keypad circuit that has stopped passing presses to the control

What you may notice with 1c2c

  • 1c2c appears while the panel is powered
  • Keys feel dead or answer only now and then
  • The oven may refuse to start a program

How the microwave detects 1c2c

Between the touch panel and the oven's control runs a small circuit that carries every press you make. The control keeps listening to that circuit while the oven is powered. If the signal from the panel looks wrong, or never arrives, the control stops trusting the panel and shows 1c2c so that you know where the trouble lies.

Nothing in the message identifies the exact part. The keys, the connector and the lead between them could each cause the same display. Turning the breaker off and on makes the control start from scratch and listen again. A clean restart shows that the circuit works, and a code that comes back tells you the panel side needs hands-on testing.

Likely causes of 1c2c

  • Keypad circuit that has stopped passing presses to the control
  • A loose or damaged lead running from the panel
  • One-time glitch cleared when power is restored

Can you keep using the microwave with 1c2c?

A microwave whose buttons do not respond cannot be started or stopped reliably, so do not use it while the code is up. Once a reset clears 1c2c and the oven works, it is fine to carry on, with an eye on the display. If the code returns after the reset, leave the breaker off and avoid pulling at the panel.

What you can safely check

  1. Cut power at the microwave's breaker and let it stand for sixty seconds.
  2. Restore the power.
  3. Keep the display in view for a minute and look for 1c2c.
  4. Press a key or run a quick heating function to confirm the panel responds.
  5. Leave the panel itself alone, and call us if the code is back after the reset.

What our technician does for 1c2c

  • Test the keypad and the connector it plugs into
  • Examine the wiring that carries the panel's signals
  • Replace only what the test proves, after you agree to the written price

How to keep 1c2c from coming back

  • Keep sticky hands and wet cloths away from the touch panel, so residue does not build up around the keys.
  • Close the door gently, since repeated hard slams can shake loose connections inside a built-in unit.

Technical reference

Code
1c2c
Appliance
Whirlpool microwave
Control family
Whirlpool microwave drawers and built-ins with a keypad
Checked
November 2026

Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.

FAQ

1c2c questions

Does 1c2c mean I need a whole new microwave?

Not by itself. The code points to the keypad circuit, and the cause is confirmed by testing. A new unit is only worth discussing if the repair cost is out of line with the oven.

Can I still use the oven when the buttons are dead?

If the panel will not accept commands, the microwave cannot be run properly. Reset the breaker once, and if the keys stay dead, leave the oven off until the circuit has been tested.

What if 1c2c disappears after the reset?

Then it may have been a one-time glitch, and you can keep using the oven. Watch for a repeat, because a returning code means the panel or its wiring should be tested.

Is 1c2c the same as the neighboring keypad code?

The meaning in the guidance is shared, since both point to the keypad circuit and its wiring. The characters on the display differ, so read yours exactly and tell us what it shows.

Will a reset hurt the microwave drawer?

No. Switching the breaker off for a minute and on again is a gentle restart, not a repair. Do nothing beyond that, because everything behind the panel stays closed for owners.

Need help with 1c2c?

We trace the cause in your home first and write the price down before any part is swapped.

Call Book a Repair
Call (813) 565-3059 Book a Repair